1、IEEE Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability IEEE Std 1792-2017 (Revision of IEEE Std 1792-2011) IEEE Power and Energy Society Sponsored by the Nuclear Power Engineering Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 1792-2017 (R
2、evision of IEEE Std 1792-2011) IEEE Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 23 March 2017 IEEE-SA Standards BoardAbstract: Activities related to preferred po
3、wer supply (PPS) reliability, including design considerations, analytical studies, operational and maintenance considerations, and interface agreements between a nuclear power generating station (NPGS) and its associated Transmission Entities are addressed in this recommended practice. Keywords: Cla
4、ss 1E, IEEE 1792, interface agreement, NPGS, nuclear power generating station, offsite power, preferred power supply (PPS), reliability, switchyard, transmission system The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Insti
5、tute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 2 8 June 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completen
6、ess of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other
7、 ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and com
8、ments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any pe
9、rson utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHAL
10、L IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT
11、 STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Trans
12、lations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not
13、 processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educati
14、onal courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from
15、any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting
16、comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able
17、to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the releva
18、nt IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisio
19、ns of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is
20、not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private
21、uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any
22、rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, no
23、n-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained thr
24、ough the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata
25、 An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a r
26、evision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the c
27、urrent edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the
28、 IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention i
29、s called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or
30、 patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant
31、 licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been re
32、ceived. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of
33、 Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be
34、 obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the Preferred Power Supply (4.6) Working Group had the following membership: George Attarian, Past Chair T amatha Womack, Current Chair and
35、 Past Vice Chair Edvin Kozo, Current Vice Chair and Past Secretary Jason Bellamy, Current Secretary Mark Bowman Paul Colaianni John Disosway Ken Fleischer Christopher Georgeson David Gladey Evans Heacock Steve Hutchins Ayodele Ishola-Salawu Harvey Leake Timothy Lensmire Kevin Littrell Roy Lyon John
36、Mallanda Singh Matharu Kenneth Miller John Minley Gene Poletto Greg Reimers Myat San Shawn Simon Tom Solinsky Sudhir Thakur The Subcommittee on Auxiliary Power (SC4) of the Nuclear Power Engineering Committee that recommended approval of this recommended practice had the following membership: Keith
37、Bush, Chair Mark Bowman, Vice Chair Kenneth Miller, Secretary George Attarian Elnora Basler Duane Brock Robert Carruth Jack Carter Richard Casalaina Paul Colaianni Parthiv Desai John Disosway Nader Eldeiry Ken Fleischer Robert Fletcher Christopher Georgeson David Gladey Dale Goodney Evans Heacock Me
38、lvin Hess Dirk Hopp Ayodele Ishola-Salawu Yoon Kim Hari Kodali Edvin Kozo Jusuf Krvavac Justin Lane Harvey Leake Bruce Lord Roy Lyon John MacDonald John Mallanda Singh Matharu Gene Poletto Gregg Reimers Bill Roettger Myat San Shawn Simon William Snider Robert Stark Mitchell Staskiewicz Sudhir Thakur
39、 Tamatha Womack7 Copyright 2017 IEEE. All rights reserved. At the time this IEEE recommended practice was submitted to the IEEE-SA Standards Board for approval, the Nuclear Power Engineering Committee (NPEC) had the following membership: Stephen Fleger, Chair Thomas Koshy, Vice Chair Daryl Harmon, S
40、ecretary Satish Aggarwal Ijaz Ahmad George Attarian George Ballassi Royce Beacom Mark Bowman Keith Bush Robert Carruth John Carter Suresh Channarasappa Paul Colaianni Tom Crawford Dennis Dellinger David Desaulniers John Disosway Kenneth Fleisher Robert Fletcher Robert Francis Christopher Georgeson J
41、ames Gleason Dale Goodney Robert Hall David Herrell Dirk Hopp Greg Hostetter Gary Johnson Christopher Kerr Wolfgang Koenig Robert Konnik James Liming Bruce Lord John MacDonald Scott Malcom Kenneth Miller Michael H. Miller Edward Mohtashemi Yasushi Nakagawa Warren Odess-Gillett Ted Riccio Mitchell St
42、askiewicz Rebecca Steinman John Stevens Marek Tengler Sudhir Thakur James Thomas Masafumi Utsumi Michael Waterman John White Y vonne Williams Tamatha Womack Paul L. Yanosy, Sr. The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted fo
43、r approval, disapproval, or abstention. Satish Aggarwal George Ballassi Farouk Baxter Hamidreza Heidarisafa Lee Herron Werner Hoelzl Gerald Nicely Mirko Palazzo James Parello Jason Bellamy William Bloethe Mark Bowman Daniel Brosnan Robert Carruth John Carter Suresh Channarasappa Preston Cooper John
44、Disosway Tim Fallesen Stephen Fleger Dale Goodney Eric W . Gray Randall Groves Ajit Gwal Daryl Harmon Greg Hostetler Steven Hutchins Wayne Johnson Yuri Khersonsky Kelsey Kile Thomas Koshy Pradeep Kumar G. Lang Benjamin Lanz Harvey Leake Timothy Lensmire Bruce Lord Omar Mazzoni T. David Mills Andrew Nack Michael Newman Rajendra Patel Gene Poletto John Ready R. Rebbapragada Ted Riccio Christopher Searles Jeremy Smith Robert Stark John Stevens John V ergis Michael Waterman John White Kenneth White Y vonne Williams Tamatha Womack
