1、IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications IEEE Std 1887-2017 IEEE Vehicular Technology Society Sponsored by the Rail Transportation Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 1887-2017 IEEE Guide for Wayside Energy Storage Systems for
2、DC Traction Applications Sponsor Rail Transportation Standards Committee of the IEEE Vehicular Technology Society Approved 14 February 2017 IEEE-SA Standards BoardAbstract: Traction power systems experience some of the most extreme variations in local power loads as compared to most other large scal
3、e electric power supply networks. These variations create challenges in the construction of reliable electric power delivery systems and in the perfor- mance of the rolling stock dependent on power supplied by the system. A solution is offered by en- ergy storage by smoothing out these power variati
4、ons, absorbing energy as system voltage rises, and delivering energy as voltage drops. Engineers are helped by this guide to identify where these solutions can provide the greatest benefits, design solutions with the greatest impact, and quantify the costs and benefits of deploying new solutions. Ke
5、ywords: dc traction, energy recovery, energy storage, fixed guideway transportation, IEEE 1887, railway, traction power, wayside energy storage, wayside energy storage system The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The
6、 Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 24 March 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or com
7、pleteness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no
8、 other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art a
9、nd comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another.
10、Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EV
11、ENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER
12、 IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4 Copyright 2017 IEEE. All rights r
13、eserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or ora
14、l, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, semina
15、rs, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are
16、 welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropr
17、iate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Comm
18、ittees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcom
19、e to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Complian
20、ce with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend t
21、o urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of bo
22、th public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users,
23、IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational intern
24、al use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom us
25、e can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendme
26、nts, corri- genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years o
27、ld and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine wheth
28、er a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards develo
29、pment process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Paten
30、ts Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a pa
31、tent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to
32、grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not
33、been received. The IEEE is not re- sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a
34、Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further informa
35、tion may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE guide was completed, the Wayside Energy Storage Systems Working Group had the following membership: Salwa Fouda, Chair Suresh ShrimavleKen Nutt, Vice Chair Roger M.
36、 A very Steve Bezner Gustavo Cevallos John Fish Paul Forquer Mike Hanratty Simon Hetherington Todd Hollett John John Andrew Jones Xin Li Yiman Mohammed Michael Natenzon Maurizio Ponzetto Jacques Poulin Patrick Savoie Ralph (Benjamin) Stell Raymond Strittmatter Gary Touryan Donald Wiles Robert Wilson
37、 Judy Wu Tom Young Gordon Yui The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Roger M. A very William Aycock Bill Brown John Fish Robert Fisher Paul Forquer Salwa Fouda H. Glickenstein Randall Groves
38、Simon Hetherington Werner Hoelzl John John Andrew Jones Walter Keevil Yuri Khersonsky Ethan Kim Thomas Kurihara Yung-chiang Lee Vishwanath Mawley Michael Newman Chris Pagni David R. Phelps Moises Ramos Richard Rohr Osman Sakr Shakti Sarai Nikunj Shah Xu She Suresh Shrimavle Jeffrey Sisson Ralph (Ben
39、jamin) Stell Rick Straubel Raymond Strittmatter Brandon Swartley Gary Touryan David Turner John Vergis David Walker Jeffrey Wharton Robert Wilson Jian Yu Matthew Zeedyk When the IEEE-SA Standards Board approved this guide on 14 February 2017, it had the following membership: Jean-Philippe Faure, Cha
40、ir Ted Burse, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Dukes Jianbin Fan J. Travis Griffith Gary Hoffman Ronald W. Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yi
41、ngli Wen Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 1887-2017, IEEE Guide for Wayside Energy Storage Systems for DC Trac- tion Applications. This introduction provides background on
42、the rationale used to develop this guide, which may aid in the understanding of the application of wayside energy storage. The need for economic consideration and perfor- mance metrics to assist in the development of energy storage systems is discussed. The importance of safety and environmental con
43、cerns and the integration of energy storage into existing operating rail systems and their introduction as part of a new rail system are discussed. Means of simulating operation and integration for the objective of optimization are also discussed. The following topics are covered: normative references, defini- tions, applications, common technologies, common topologies, specifying a wayside energy storage system, economic considerations, modeling and simulation of energy storage, performance, safety and environment, installation and integration, and verification and validation.
