1、 IEEE Recommended Practice for Electrical Installations on ShipboardSafety Considerations Sponsored by the Petroleum fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions rel
2、ating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goo
3、ds and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its
4、 standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her
5、 own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLA
6、RY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
7、 IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that
8、an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to
9、be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views shou
10、ld be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting inf
11、ormation or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to
12、comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been
13、addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Stand
14、ards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers
15、 of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft
16、 and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standard
17、ization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant user
18、s a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, M
19、A 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be supe
20、rseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in
21、 effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users a
22、re cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ie
23、ee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the
24、 following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this
25、standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at htt
26、p:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair di
27、scrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal valid
28、ity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of th
29、e validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE recommended practice was completed, the Electrical Installations on Shipboar
30、dsSafety Considerations, P45.5 Working Group had the following membership: Dennis K. Neitzel, Chair Rodrick J. Van Wart, Vice Chair Timothy L. Gauthier, Secretary John Cadick Don Chambers Chris Heron Jeff Hawxhurst Charles Helmick Moni Islam Jason Martin Sergio Panetta Joseph Tame Mike Turner Elizab
31、eth White Al Winfield James M. Wolfe The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Tirloch Bhat Paul Bishop Bill Brown William Bush William Byrd Eldridge Byron Paul C
32、ardinal Ray Davis David E. DeLuca Timothy L. Gauthier Pamela Gold J. Travis Griffith Randall Groves Chris Heron Lee Herron Werner Hoelzl John Kay Yuri Khersonsky Robert Konnik Saumen Kundu Arturo Maldonado William McBride T. David Mills Daleep Mohla Dennis K. Neitzel Michael Newman T. Olsen Lorraine
33、 Padden Richard Paes Sergio Panetta Joseph Piff Iulian Profir Vincent Saporita Bartien Sayogo Robert Seitz Donald Voltz Kenneth White Wayne Williams James M. Wolfe Copyright 2014 IEEE. All rights reserved. vi When the IEEE-SA Standards Board approved this recommended practice on 21 August 2014, it h
34、ad the following membership: John Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Stephen Dukes Jean-Phillippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David J
35、. Law Hung Ling Oleg Logvinov T. W. Olsen Glenn Parsons Ron Peterson Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Dick DeBlasio, DOE Representative Mike Janezic, NIST Repres
36、entative Catherine Berger Senior Program Manager, IEEE-SA Content Publishing Lisa Perry Program Manager, IEEE-SA Technical Community Copyright 2014 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std 45.5-2014, IEEE Recommended Practice for Electrical Installations
37、on ShipboardSafety Considerations. The IEEE 45 series comprises nine recommended practices addressing electrical installations on vessels and marine platforms. IEEE Std 45.5 provides recommended practice electrical safety considerations and is intended for use with the IEEE 45 series of documents. T
38、he topics covered in this document should be considered from the beginning of the project and throughout the design and construction processes; thereby, they should facilitate the integration of electrical systems at the shipyard level. The IEEE Std 45.5 electrical safety recommendations provide a f
39、oundation for an electrical safety program but should be supplemented with additional safety practices as appropriate. Previous editions of IEEE Std 45 were developed as single documents addressing all areas. On June 9, 2005, Project Authorization Request (PAR) P45 for the Revision of IEEE Std 45-20
40、02 was approved, and the revision of IEEE Std 45 as a single document began. It soon became apparent that attempting to cover all issues in a single document would produce a document that was very large and, therefore, difficult to ballot due to the wide range of issues needed to be addressed. In Se
41、ptember 2008, it was decided that the revision of IEEE Std 45 should be developed as a base document with separate associated documents addressing specific areas. On December 10, 2008, the IEEE-SA Standards Board approved separate PARs for eight separate recommended practices. Subsequently, it was r
42、ecognized that two areas were very close to balloting and contained important information. Additional PARs were then prepared and approved on September 11, 2009 (for switchboards), and December 9, 2009 (for cable systems), bringing the total number of standards in the IEEE 45 series to nine: a) IEEE
43、 Std P45, IEEE Recommended Practice for Electrical Installations on Shipboard b) IEEE Std P45.1, IEEE Recommended Practice for Electrical Installations on ShipboardDesign c) IEEE Std P45.2, IEEE Recommended Practice for Electrical Installations on Shipboard Controls and Automation d) IEEE Std P45.3,
44、 IEEE Recommended Practice for Electrical Installations on Shipboard Systems Engineering e) IEEE Std P45.4, IEEE Recommended Practice for Electrical Installations on ShipboardMarine Sectors and Mission Systems f) IEEE Std P45.5, IEEE Recommended Practice for Electrical Installations on ShipboardSafe
45、ty Considerations g) IEEE Std P45.6, IEEE Recommended Practice for Electrical Installations on Shipboard Electrical Testing h) IEEE Std P45.7, IEEE Recommended Practice for Electrical Installations on Shipboard Switchboards i) IEEE Std P45.8, IEEE Recommended Practice for Electrical Installations on
46、 ShipboardCable Systems Several other IEEE standards have been prepared or are currently being developed to support the IEEE Std 45 series. These include the following: IEEE Std 1580, IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities Copyright 2014 IEEE
47、. All rights reserved. viii IEEE P1580.1, Draft Recommended Practice for Insulated Bus Pipe for Use on Shipboard and Fixed or Floating Platforms IEEE Std 1662, IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships IEEE Std 1709, IEEE Recommended Practice
48、 for 1 to 35 kV Medium Voltage DC Power Systems on Ships IEEE Std 1826, IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW IEC/PAS 60092-510, Electrical Installations in ShipsPart 510: High Voltage Shore Connection Systems (HVSC) Co
49、pyright 2014 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 1 3. Definitions 3 4. Introduction to electrical safety 6 4.1 General discussion . 6 4.2 Definition of safe . 7 4.3 Exposure to electrical hazards . 7 5. Establishing an electrical safety program . 16 5.1 General discussion . 16 5.2 Content of program 17 6. Providing and maintaining electrically safe systems and equipment . 26 6.1 General discussion . 26 6.2 Design considerations 26 6.3 Installation safety requirements . 30
