1、 IEEE Std C135.90-2014 IEEE Standard for Pole Line Hardware for Overhead Line Construction Sponsor Transmission and Distribution Committee of the IEEE Power and Energy Society Approved 27 March 2014 IEEE-SA Standards Board Abstract: This standard covers the requirements of inch-based wood pole line
2、hardware commonly used in overhead line construction. Metric pole line hardware is not covered by this standard. Keywords: hardware, IEEE C135.90, line, overhead, pole, wood The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The
3、Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 28 May 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or comple
4、teness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no ot
5、her ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and
6、comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any
7、 person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT S
8、HALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTR
9、ACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development pr
10、ocess involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA
11、 Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting in
12、formation on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membe
13、rship affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent
14、a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comment
15、s or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standa
16、rds should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does no
17、t imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, a
18、nd these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by refere
19、nce, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. P
20、hotocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Co
21、pyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of
22、 IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition o
23、f the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still
24、of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendment
25、s, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if
26、 any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may requi
27、re use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Lette
28、r of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with r
29、easonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for whic
30、h a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminat
31、ory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2014 IEEE. All rights reser
32、ved. vi Participants At the time this IEEE standard was completed, the Overhead Line Structural Materials and Hardware Working Group had the following membership: Keith Lindsey, Chair Tom McCarthy, Vice Chair Dick Aichinger Mehmet Arslan Tony Baker Yair Berenstein Allen Bernstorf Nelson Bingel Tom B
33、ozeman Michael Brucato Bill Calhoun Jerry Cheeks Allen Clapp Len Consalvo Glenn Davidson Mike Della Vecchia Nicholas DeSantis Tony DiGioia Michael Dolan Bruce Freimark Erich Gnandt Waymon Goch Asim Haldar Steve Harrizon Ibrahim Hathout Donald Heald Michael Hudgens Magdi Ishac Doug Jones Jacob Joplin
34、 Mark Jurgemeyer Kenneth Keller Bob Kluge Samy Krishnasamy Brian Lacoursiere Hong To Lam Jim Larkey Keith Lindsey Ming Lu Otto Lynch Tom McCarthy Ray McCoy Steven Miller May Milles Robert Milles Roger Montambo George Niles John Olenic Bob Oswald Doug Proctor Brian Reed Rafael Rios Karen Rowe Ron Row
35、land Robert Santarsiero Ross Smith Steve Smith Eric Stemshorn Andrew Stewart Carl Tamm Vinh Tran Larry Vandergriend Jeff Wan Ed West The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Saleman Alibhay
36、Anthony Baker Harvey Bowles William Byrd Thomas Callsen James Chapman Robert Christman Glenn Davidson Gary Donner Randall Dotson Gary Engmann David Gilmer Waymon Goch Edwin Goodwin Charles Grose Randall Groves Jeffrey Hartenberger Lee Herron Werner Hoelzl Magdi Ishac Mark Jurgemeyer Gael Kennedy Rob
37、ert Kluge Joseph L. Koepfinger Jim Kulchisky Chung-Yiu Lam Paul Lindemulder Greg Luri William McBride Thomas McCarthy Gary Michel Arthur Neubauer Michael Newman Carl Orde Lorraine Padden Bansi Patel Robert Peters Douglas Proctor Keith Reese Michael Roberts Stephen Rodick Thomas Rozek Bartien Sayogo
38、Dennis Schlender Gil Shultz Jeremy Smith Jerry Smith Gary Stoedter John Toth John Vergis Daniel Ward Luis Zambrano Copyright 2014 IEEE. All rights reserved. vii When the IEEE-SA Standards Board approved this standard on 27 March 2014, it had the following membership: John Kulick, Chair Jon Walter Ro
39、sdahl, Vice-chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Stephen Dukes Jean-Phillippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David Law Hung Ling Oleg Logvinov Ted Olsen Glenn Parsons Ron Peters
40、on Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Documen
41、t Development Erin Spiewak IEEE Standards Program Manager, Technical Program Development Copyright 2014 IEEE. All rights reserved. viii Introduction This introduction is not part of IEEE Std C135.90-2014, IEEE Standard for Pole Line Hardware for Overhead Line Construction. This standard combines the
42、 following standards for wood pole line hardware for overhead line construction: ANSI C135.22, ANSI Standard for Zinc-Coated Ferrous Pole-Top Insulator Pins with Threads for Overhead Line Construction.a IEEE PC135.11, Draft Standard for Zinc-coated Ferrous Guy Attachments, Wrap and Formed Guy Hooks,
43、 Guy Strain Plates, and Pole Eye Plates for Overhead Line Construction.b IEEE Std C135.2, IEEE Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction.c,d IEEE Std C135.12, IEEE Standard for Pole Guards. IEEE Std C135.17, IEEE Standard for Zinc-Coated
44、 Ferrous Bolt-Type Insulator Pins with Threads Used with Pin Type Insulators for Overhead Line Construction. IEEE Std C135.33, IEEE Standard for Galvanized Ferrous Crossarm Gains for Overhead Line Construction. NEMA PH11, NEMA Standards for Galvanized Ferrous Guy Attachments, Wrap and Formed Guy Hoo
45、ks, Guy Strain Plates and Pole Eye Plates.e NEMA PH23, NEMA Standards for Steel and Malleable Iron Guy Clamps. aANSI publications are available from the American National Standards Institute (http:/www.ansi.org). bThis IEEE project was withdrawn in December 2010. cIEEE publications are available fro
46、m The Institute of Electrical and Electronics Engineers (http:/shop.ieee.org/). dThe IEEE standards or products referred to in this introduction are trademarks of The Institute of Electrical and Electronics Engineers, Inc. eNEMA publications are available from Global Engineering Documents (http:/ Co
47、pyright 2014 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 1 3. Definitions for acceptability and sampling . 2 4. Strand-eye anchor rods and nuts . 3 4.1 Anchor rods . 3 4.2 Nuts for anchor rods 3 4.3 Threads 5 4.4 Tests for strength . 6 4.5
48、 Sizes . 6 4.6 Protective coating 7 5. Crossarm braces . 7 5.1 Material 7 5.2 Dimensions 7 5.3 Strength 8 5.4 Protective coating 9 6. Guy attachments, wrap and formed guy hooks, guy strain plates, guy clamps, and pole eye plates 9 6.1 Material 9 6.2 Guy clamp bolts strength . 9 6.3 Dimensions 9 6.4
49、Protective coating 9 7. Bolt-type and pole-top insulator pins with lead or nylon alloy threads 18 7.1 Material 18 7.2 Dimensions 19 7.3 Threads 19 7.4 Strength 19 8. Pole guards . 25 8.1 Material 25 8.2 Dimensions 25 8.3 Protective coating 25 9. Crossarm gains . 25 9.1 Material 25 9.2 Dimensions 25 9.3 Protective coating 25 10. Protective coatings 30 10.1 Galvanizing 30 10.2 Other coatings 30 11. Marking 30 12. Inspection requirements 30 Copyright 2014 IEEE. All rights reserved. x 13. Determination of acceptability . 30 Annex A (informati
