1、IEEE Std C37.12.1-2007IEEE Guide for High-Voltage (1000 V)Circuit Breaker Instruction ManualContentIEEE3 Park Avenue New York, NY 10016-5997, USA28 March 2008IEEE Power Engineering SocietySponsored by theSwitchgear CommitteeC37.12.1TMIEEE Std C37.12.1-2007 IEEE Guide for High-Voltage (1000 V) Circui
2、t Breaker Instruction Manual Content Sponsor Switchgear Committee of the IEEE Power Engineering Society Approved 5 December 2007 IEEE-SA Standards Board Abstract: This guide provides a recommended table of contents for high-voltage circuit breaker instruction manuals. The guide provides a listing of
3、 information that will help a knowledgeable user receive, install, commission, operate, and maintain circuit breakers. Recommended additional material is described in Clause 5 for circuit breakers that are intended for high-voltage, free-standing installations. Drawout circuit breakers used in switc
4、hgear are excluded from Clause 5 requirements. Circuit breakers used in gas-insulated switchgear installations are excluded from this guide. This guide in no way replaces the manufacturers instruction manual, which is to be used for safe and effective utilization of the circuit breaker. This guide h
5、elps organize instruction manual information in a consistent and user-friendly manner. Keywords: circuit breaker, disposal, installation, instruction manual, maintenance, operation _ The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 200
6、8 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 28 March 2008. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent and Trademark Office, owned by the Institute of Electrical and Electronics Engineers, Incorporated
7、 PDF: ISBN 978-0-7381-5376-6 STD95761 Print: ISBN 978-0-7381-5377-3 STDPD95761 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Standards documents are developed within the IEEE Soc
8、ieties and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoint
9、s and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test,
10、 or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequent
11、ial, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document. The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty, i
12、ncluding any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.” The existence of an IEEE Standard does not imply that there are no other ways to produ
13、ce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received
14、 from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflec
15、t the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor i
16、s the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon his or her independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advi
17、ce of a competent professional in determining the appropriateness of a given IEEE standard. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE,
18、 the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societi
19、es and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Oper
20、ations Manual shall not be considered the official position of IEEE or any of its committees and shall not be considered to be, nor be relied upon as, a formal interpretation of the IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards
21、shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position, explanation, or interpretation of the IEEE. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation with I
22、EEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscatawa
23、y, NJ 08854 USA Authorization to photocopy portions of any individual standard for internal or personal use is granted by The Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, ple
24、ase contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Introduction This introduction
25、is not part of IEEE Std C37.12.1-2007, IEEE Guide for High-Voltage (1000 V) Circuit Breaker Instruction Manual Content. This first issue of the IEEE Guide for High-Voltage (1000 V) Circuit Breaker Instruction Manual Content provides guidance or assistance to manufacturers on the data and information
26、 to include with their circuit breaker instruction manuals. Circuit breaker instruction manuals are considered to include all component instructions, drawings and illustrations, data sheets, documentation, and other written information provided by the circuit breaker manufacturer. The specific mater
27、ial recommended for inclusion in instruction manuals is that data and information commonly employed by users for the installation and operation and maintenance of circuit breakers. A separate Clause 5 contains additional information for specific high-voltage, free-standing circuit breakers such as s
28、ome nameplate information, some test measurements, and some setting or calibration data as well as the other topics required for the installation, operation, and maintenance of a circuit breaker. This summary information is not intended to replace a thorough review of more detailed information conta
29、ined in the manufacturers instruction manual. Clause 5 does not apply to drawout circuit breakers such as those used in switchgear assemblies. A generic instruction manual may be more appropriate for such circuit breakers and the instruction manual for these circuit breakers may apply to many other
30、circuit breakers produced over a wide range of time. This guide does not apply to circuit breakers used in gas insulated switchgear. A manufacturers instruction manual is the definitive reference for information on the receiving, installation, operation, maintenance, and disposal of circuit breakers
31、 This guide is not intended to provide or replace the circuit breaker data normally found on the nameplate, the test reports, or the various other forms of data provided to owners of circuit breakers by the circuit breaker manufacturer. The guide is intended to provide a recommended minimum content
32、 for a high-voltage circuit breaker instruction manual. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers
33、of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This docume
34、nt is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document
35、available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. iv Copyright 2008 IEEE. All rights reserved. Updating of IEEE documents Users of IEEE standards should be aware that these documents may be superseded at any time
36、 by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order
37、to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Standards Association website at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the address listed previously. F
38、or more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA website at http:/standards.ieee.org. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errat
39、a/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/ index.html. Patents Attention is called to the possibility that implementation of this guide may r
40、equire use of subject matter covered by patent rights. By publication of this guide, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, f
41、or conducting inquiries into the legal validity or scope of Patents Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this guide are ex
42、pressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this guide was submitted to the IEEE-SA Standa
43、rds Board for approval, the HVCB Quality whereas, this guide is directed at the various forms of documentation that pertain to a circuit breaker. Users are advised that this guide is NOT an instruction manual. 1Information on references can be found in Clause 2. IEEE Std C37.12.1-2007 IEEE GUIDE FOR
44、 HIGH-VOLTAGE (1000 V) CIRCUIT BREAKER INSTRUCTION MANUAL CONTENT This guide suggests items for inclusion in an instruction manual that is to be prepared by the circuit breaker manufacturer. A manufacturer may include additional information that is not identified in this guide. Users are to follow m
45、anufacturers instructions in the care of circuit breakers. Clause 5 of this guide does not apply to instruction manuals for circuit breakers used in metal-clad or metal-enclosed switchgear, nor to circuit breakers used in gas-insulated switchgear. Clause 5 contains additional requirements for high-v
46、oltage, free-standing circuit breakers. Some items do not apply to a specific technology of circuit breaker. 2. 3.Normative references The following referenced documents are indispensable for the application of this document (i.e., they must be understood and used, so each referenced document is cit
47、ed in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies. IEEE Std C37.04-1999 (Reaff 2006), IEEE Standard Rating Struct
48、ure for AC High-Voltage Circuit Breakers. 2,3IEEE Std C37.010-1999 (Reaff 2005), IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis. Special terms For the purposes of this guide, the following terms and definitions apply. The Authoritative Dictionary of
49、IEEE Standards, Seventh Edition, should be referenced for terms not defined in this clause. 3.1 close-open contact dwell time: The time between contact-make (on a closing operation) and contact-open (on an opening operation) where there is no electrical arcing phenomena involved. 3.2 free-standing circuit breaker: A circuit breaker that is installed in the substation, not connected mechanically to other devices, except by power connectors, leads and control wires, that can be installed and removed without moving other components of the substation, and t
