1、IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear IEEE Std C37.24-2017 (Revision of IEEE Std C37.24-2003) IEEE Power and Energy Society Sponsored by the Switchgear Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C37.24-2017 (Revision of IEE
2、E Std C37.24-2003) IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear Sponsor Switchgear Committee of the IEEE Power and Energy Society Approved 23 March 2017 IEEE-SA Standards BoardAbstract: Information to assist in evaluating the effect of solar radiation
3、on outdoor metal- enclosed switchgear including metal-enclosed bus and control switchboards is provided in this guide. Specific data in the form of a continuous current capability factor for specific maximum monthly normal temperatures at the installation location to adjust the continuous current ca
4、pability of out- door metal-enclosed switchgear to the solar radiation condition required are given in this guide. Examples of maximum monthly normal temperatures along with sources for data for the US and for Canada are also presented in this guide. Keywords: absorption coefficient, finish, IEEE C3
5、7.24, metal-enclosed switchgear, outdoor, solar constant, solar radiation, temperature The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published
6、28 July 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: re
7、sults; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and servi
8、ces related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards a
9、vailable, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own indepen
10、dent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CO
11、NSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
12、 ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an
13、IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.4 Copyright 2017 IEEE. All rights reserved. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual
14、 shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
15、make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. Howev
16、er, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interes
17、ts, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Committees are not able to provide an instant response to comments or questions except in tho
18、se cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to t
19、he following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any ap
20、plicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not
21、 be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations
22、 and use in private self-regulation, standardization, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to paym
23、ent of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
24、Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.5 Copyright 2017 IEEE. All rights reserved. Updating of IEEE Standards
25、 documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri- genda, or errata. An official IEEE document at any point in time consists of
26、the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its conten
27、ts, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the is
28、suance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata
29、Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this s
30、tandard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via
31、an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or und
32、er reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying E
33、ssential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements ar
34、e reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Cop
35、yright 2017 IEEE. All rights reserved. Participants At the time this IEEE guide was completed, the C37.24 Solar Radiation Working Group had the following membership: John McClelland, Chair T erry A. Woodyard, Vice Chair Russell I. Boyce Doug Edwards Lawrence B. Farr Michael Flack Paul Gingrich Sahad
36、ev (Dave) Gohil Ronald Hartzel Tom Hawkins Dan Hrncir Anurag Jivanani Michael LaFond Frank Mayle Deepak Mazumdar Darryl Moser T. W . Olsen Steve Powell Julian Rizo Carl Schneider Chand Z. Tailor The following members of the individual balloting committee voted on this guide. Balloters may have voted
37、 for approval, disapproval, or abstention. Roy Alexander Chris Ambrose Ficheux Arnaud Peter Balma Thomas Barnes Jean-Marc Biasse William Bloethe Russell I. Boyce Gustavo Brunello Ted Burse William Bush William Byrd Eldridge Byron Paul Cardinal Gary Donner Louis Doucet Douglas J. Edwards Lawrence B.
38、Farr Michael Flack Sergio Flaures Keith Flowers Paul Gingrich Mietek Glinkowski Sahadev (Dave) Gohil Edwin Goodwin Randall Groves Ajit Gwal John Harley Thomas Hawkins Jared Hines Ronald Hartzel Tom Hawkins Dan Hrncir Richard Jackson Andrew Jones Gael Kennedy Boris Kogan Jim Kulchisky Chung-Yiu Lam H
39、au Liu Albert Livshitz Frank Mayle William McBride Edward Mccall John McClelland Charles Morse Darryl Morser Jerry Murphy Authur Neubauer Joe Nims T. W . Olsen Lorraine Padden Iulian Profir Larry Putman Charles Rogers Ryandi Ryandi Charles Suave Bartien Sayogo Nikunj Shah Devki Sharma Garett Sims Ve
40、selin Skendzic Jerry Smith James Swank David Tepen John Vergis Mark Waldron Kenneth White Terry Woodyard Jian Yu Luis Zambrano7 Copyright 2017 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this guide on 23 March 2017, it had the following membership: Jean-Philippe Faure, Chair
41、 Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly R
42、obby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus8 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C37.242017, IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclos
43、ed Switchgear. This guide is an outgrowth of a technical paper presented at the AIEE Winter general meeting in New York, N.Y ., January 1822, 1954. In October 1955, the paper was issued by AIEE Standards Committee as Publication 955. In 1962, 3000 A ratings were added and the temperature data from t
44、he National Oceanic and Atmospheric Administration were updated. Subsequently, it was revised and published as IEEE Std C37.24- 1971 (also identified as IEEE Std 144-1971). A new section was added in the 1986 guide discussing color and finish of the metal-enclosed switchgear and their impact on temp
45、erature due to solar radiation. 1 This guide is a revision of ANSI/IEEE C37.24-2003. Standards references have been updated and the latest temperature data (for 19812010) for the US and Canada has been referenced. This revision also includes metrification of English units and the additional bibliographical entries to cover broad geographic locations. This guide was prepared by a working group operating under the Switchgear Assemblies Subcommittee of the IEEE Switchgear Committee. 1 Information on references can be found in Clause 2.
