1、IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers IEEE Std C57.138-2016 (Revision of IEEE Std C57.138-1998) IEEE Power and Energy Society Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C57.138-2016 (Revision of IEEE Std
2、C57.138-1998) IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 7 December 2016 IEEE-SA Standards BoardAbstract: General test procedures for performing routine quality control tests that are
3、suitable for high-volume, production line testing are included in this recommended practice. Transformer con- nections, test methods, circuit configurations, and failure detection methods are addressed. This recommended practice covers liquid-immersed, single- and three-phase distribution transforme
4、rs. Keywords: distribution transformers, IEEE C57.138, production line testing, routine test The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Publ
5、ished 15 March 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating
6、 to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods an
7、d services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its stan
8、dards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own
9、independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY
10、, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARI
11、SING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review o
12、f documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations
13、 Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards
14、 shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE
15、. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned
16、interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Committees are not able to provide an instant response to comments or questions except
17、 in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitt
18、ed to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to
19、 any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents
20、may not be construed as doing so Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regul
21、ations, and use in private self-regulation, standardization, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE.
22、 All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing
23、fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Sta
24、ndards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri- genda, or errata. An official IEEE document at any point in time consis
25、ts of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its
26、contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through
27、the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata
28、, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may
29、require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted
30、Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates,
31、with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying Essential Patent Claim
32、s for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-d
33、iscriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All
34、 rights reserved. Participants At the time this IEEE recommended practice was completed, the PC57.138 Working Group had the following membership: Arthur Molden, Chair Susmitha D. T arlapally, Vice Chair Alain Bolliger Jeffrey Britton John Crotty Michael Franchek Geoffrey Gill James McBride Harry Pep
35、e Daniel Sauer The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Roberto Asano Donald A yers Barry Beaster Steven Bezner Wallace Binder Thomas Blackburn Jeffrey Britton Paul Cardinal John
36、 Crouse Gary Donner Jorge Fernandez Daher Namal Fernando Bruce Forsyth Derek Foster Michael Franchek Fredric Friend Carlos Gaytan Randall Groves Ajit Gwal Said Hachichi Jeffrey Helzer Mohammad Iman Richard Jackson John Kay Gael Kennedy Vladimir Khalin Yuri Khersonsky Gary King Axel Kraemer Jim Kulch
37、isky Saumen Kundu John Lackey Chung-Yiu Lam Benjamin Lanz William Larzelere Aleksandr Levin Jinesh Malde Richard Marek Lee Matthews Omar Mazzoni William McBride Nigel Mcquin Joseph Melanson Arthur Molden Daniel Mulkey Jerry Murphy Ryan Musgrove Ali Naderian Jahromi K. R. M. Nair Michael Newman Lorra
38、ine Padden Bansi Patel Dhiru Patel Brian Penny Christopher Petrola Alvaro Portillo Iulian Profir Johannes Rickmann Thomas Rozek Daniel Sauer Bartien Sayogo Nikunj Shah Stephen Shull Charles Simmons Jeremy Smith Jerry Smith Steve Snyder Sanjib Som Ronald Stahara Wayne Stec Susmitha D. Tarlapally Davi
39、d Tepen Alan Traut Roger Verdolin John Vergis Jane Verner Sukhdev Walia John Wang Alan Wilks Jennifer Yu7 Copyright 2017 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this recommended practice on 7 December 2016, it had the following membership: Jean-Philippe Faure, Chair Ted
40、Burse, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Dukes Jianbin Fan J. Travis Griffith Gary Hoffman Ronald W. Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli We
41、n Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus8 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C57.138-2016, IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers. The routine impulse test for distributio
42、n transformers was proposed and developed by manufacturers of small distribution transformers as a means of including a simplified and reliable impulse test into their routine test procedures. This recommended practice was first published in 1998 and was the result of almost a decade of working grou
43、p discussion that progressed through multiple drafts. The intent was to document not just a test procedure but to include a compendium of tutorial information to enable testing engineers and operators to better understand the test procedures necessary to a successful implementation of the routine im
44、pulse test. Included in this document are sections on the design of the impulse test circuit and how it was adapted for use with a wide range of distribution transformers, test circuit connection diagrams for single- and three-phase transformers, recommended fault detection methods, and the use of analog and digital fault detection systems. Since its first publication there have been only minor changes made to the original, which goes to indicate the efficacy of this document.
