1、 ISO 2015 Earth-moving machinery Product identification numbering system AMENDMENT 1 Engins de terrassement Systme de numrotation pour lidentification des produits AMENDEMENT 1 INTERNATIONAL STANDARD ISO 10261 Second edition 2002-07-01 Reference number ISO 10261:2002/Amd.1:2015(E) AMENDMENT 1 2015-1
2、1-15 ISO 10261:2002/Amd.1:2015(E)ii ISO 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
3、 including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzer
4、land Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 10261:2002/Amd.1:2015(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is nor
5、mally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in
6、the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular t
7、he different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives Attention is drawn to the possibility that some of the elements of this document
8、may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
9、 Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles
10、in the Technical Barriers to Trade (TBT), see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/TC 127, Earth-moving machinery, Subcommittee SC 1, Test methods relating to safety and machine performance. ISO 2015 All rights reserved iii Earth-
11、moving machinery Product identification numbering system AMENDMENT 1 Page 1, Scope Add following note under Clause 1, Scope, first paragraph. NOTE ISO 10261 PIN can be used on other types of off road work machines. Page 6, Clause 8 Add Table 2 as follows after Table 1. Table 2 Year designation codes
12、 after 2015 Year Code Year Code Year Code Year Code 2016 G 2024 R 2032 2 2040 A 2017 H 2025 S 2033 3 2041 B 2018 J 2026 T 2034 4 2042 C 2019 K 2027 V 2035 5 2043 D 2020 L 2028 W 2036 6 2044 E 2021 M 2029 X 2037 7 2045 F 2022 N 2030 Y 2038 8 2046 G 2023 P 2031 1 2039 9 2047 H ISO 10261:2002/Amd.1:2015(E) ISO 2015 All rights reserved 1 ISO 10261:2002/Amd.1:2015(E) ISO 2015 All rights reserved ICS 53.100 Price based on 1 page
