1、ICS 65.060.10 Ref. No. ISO 23206:2005/Cor.1:2007(E) ISO 2007 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 23206:2005 TECHNICAL CORRIGENDUM 1 Published 2007-03-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONAgricultural wheeled
2、 tractors and attachments Front loaders Carriages for attachments TECHNICAL CORRIGENDUM 1 Tracteurs agricoles roues et accessoires Chargeuses frontales Accouplements sur structures pour les accessoires RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to International Standard ISO 23206:2005 was prep
3、ared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 4, Tractors. ISO 23206:2005/Cor.1:2007(E) 2 ISO 2007 All rights reservedPage 3, Figure 3 Replace the figure by the following one. Dimensions in millimetres Key 1 clearance for hook 2 clearance
4、 for eyelet 3 buffer for attachment 4 border of front of carriage 5 locking pin Figure 3 Carriage dimensions Explanation of the replacement of the figure For proper coupling/function of the carriage, in the right-hand side of the drawing it is necessary that the horizontal dimension that was formerl
5、y W 35 mm, in combination with the dimension 720 0 2 mm, be in any case greater than the horizontal dimension 790 mm 2 mm in Figure 4. The sum of the smallest values allowed for dimensions W 35 mm (35 mm itself) and 720 mm (718 mm) is 788 mm just the lower limit of dimension 790 mm 2 mm of Figure 4. In this case, no coupling is possible. Accordingly, horizontal dimension W 35 mm has been replaced by W 38 mm in the corrected Figure 3.
