1、Reference number ISO/IEC 17877:2000(E) ISO/IEC 2000 INTERNATIONAL STANDARD ISO/IEC 17877 First edition 2000-04-15 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Private User
2、Mobility (PUM) Call handling additional network features Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Spcifications, modle fonctionnel et flux dinformations Mobilit de lusager priv (PUM) Caractristiques additionnelles de rseau d
3、e traitement dappelISO/IEC 17877:2000(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performin
4、g the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF fi
5、le can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secre
6、tariat at the address given below. ISO/IEC 2000 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
7、 address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 734 10 79 E-mail copyrightiso.ch Web www.iso.ch Printed in Switzerland ii ISO/IEC 2000 All rights reservedISO/IEC 17877:2000(E) ISO/IEC 2000 A
8、ll rights reserved iii Contents Foreword vi Introduction vii 1 Scope 1 2 Conformance 1 3 Normative references 1 4 Definitions 2 4.1 External definitions 2 4.2 Additional network feature (ANF) 3 4.3 Alternative identifier 3 4.4 Destination number 3 4.5 Home Data Base (HDB) 3 4.6 Home PINX 3 4.7 Hosti
9、ng address 3 4.8 Incoming PUM call 3 4.9 Originating number 3 4.10 Outgoing PUM call 3 4.11 Private User Mobility (PUM) 3 4.12 PUM registration 3 4.13 PUM user 3 4.14 PUM user identity 3 4.15 Visitor Data Base (VDB) 3 4.16 Visitor PINX 3 5 List of acronyms 3 6 ANF-PUMI stage 1 specification 4 6.1 De
10、scription 4 6.1.1 General description 4 6.1.2 Qualifications on applicability to telecommunication services 5 6.2 Procedure 5 6.2.1 Provision/withdrawal 5 6.2.2 Normal procedures 5 6.2.3 Exceptional procedures 5 6.3 Interaction with other supplementary services and ANFs 5 6.3.1 Number identification
11、 services (SS-CLIP, SS-COLP, SS-CLIR) 5 6.3.2 Calling Name Identification Presentation (SS-CNIP) 5 6.3.3 Connected Name Identification Presentation (SS-CONP) 5 6.3.4 Calling/Connected Name Identification Restriction (SS-CNIR) 5 6.3.5 Call Completion to Busy Subscriber (SS-CCBS) 5 6.3.6 Call Completi
12、on on No Reply (SS-CCNR) 5 6.3.7 Call Transfer (SS-CT) 5 6.3.8 Call Forwarding Unconditional (SS-CFU) 5 6.3.9 Call Forwarding Busy (SS-CFB) 6 6.3.10 Call Forwarding No Reply (SS-CFNR) 6 6.3.11 Call Deflection (SS-CD) 6 6.3.12 Path Replacement (ANF-PR) 6 6.3.13 Call Offer (SS-CO) 6 6.3.14 Call Intrus
13、ion (SS-CI) 6 6.3.15 Do not Disturb (SS-DND) 6ISO/IEC 17877:2000(E) iv ISO/IEC 2000 All rights reserved 6.3.16 Do not Disturb Override (SS-DNDO) 6 6.3.17 Advice of Charge (SS-AOC) 6 6.3.18 Recall (SS-RE) 6 6.3.19 Call Interception (ANF-CINT) 6 6.3.20 Transit Counter (ANF-TC) 6 6.3.21 Route Restricti
14、on Class (ANF-RRC) 6 6.3.22 Message Waiting Indication (SS-MWI) 6 6.3.23 Wireless Terminal Location Registration (SS-WTLR) 6 6.3.24 Wireless Terminal Incoming Call (ANF-WTMI) 6 6.3.25 Wireless Terminal Outgoing Call (ANF-WTMO) 6 6.3.26 Wireless Terminal Authentication of a WTM User (SS-WTAT) 6 6.3.2
15、7 Wireless Terminal Authentication of the PISN (SS-WTAN) 6 6.3.28 C om m onIn f orm ation(A NF- CMN) 7 6.3.29 Call Priority Interruption (Protection) (SS-CPI(P) 7 6.3.30 Private User Mobility Registration (SS-PUMR) 7 6.3.31 Private User Mobility Outgoing Call (ANF-PUMO) 7 6.4 Interworking considerat
16、ions 7 6.5 Overall SDL 7 7 ANF-PUMO stage 1 specification 7 7.1 Description 7 7.1.1 General description 7 7.1.2 Qualifications on applicability to telecommunication services 8 7.2 Procedure 8 7.2.1 Provision/withdrawal 8 7.2.2 Normal procedures 8 7.2.3 Exceptional procedures 8 7.3 Interaction with o
17、ther supplementary services and ANFs 8 7.3.1 Number identification services (SS-CLIP, SS-COLP, SS-CLIR) 8 7.3.2 Calling Name Identification Presentation (SS-CNIP) 8 7.3.3 Connected Name Identification Presentation (SS-CONP) 8 7.3.4 Calling/Connected Name Identification Restriction (SS-CNIR) 8 7.3.5
18、Call Completion to Busy Subscriber (SS-CCBS) 8 7.3.6 Call Completion on No Reply (SS-CCNR) 8 7.3.7 Call Transfer (SS-CT) 8 7.3.8 Call Forwarding Unconditional (SS-CFU) 8 7.3.9 Call Forwarding Busy (SS-CFB) 8 7.3.10 Call Forwarding No Reply (SS-CFNR) 9 7.3.11 Call Deflection (SS-CD) 9 7.3.12 Path Rep
19、lacement (ANF-PR) 9 7.3.13 Call Offer (SS-CO) 9 7.3.14 Call Intrusion (SS-CI) 9 7.3.15 Do not Disturb (SS-DND) 9 7.3.16 Do not Disturb Override (SS-DNDO) 9 7.3.17 Advice of Charge (SS-AOC) 9 7.3.18 Recall (SS-RE) 9 7.3.19 Call Interception (ANF-CINT) 9 7.3.20 Transit Counter (ANF-TC) 9 7.3.21 Route
20、Restriction Class (ANF-RRC) 9 7.3.22 Message Waiting Indication (SS-MWI) 9 7.3.23 Wireless Terminal Location Registration (SS-WTLR) 9 7.3.24 Wireless Terminal Incoming Call (ANF-WTMI) 9 7.3.25 Wireless Terminal Outgoing Call (ANF-WTMO) 9 7.3.26 Wireless Terminal Authentication of a WTM User (SS-WTAT
21、) 9 7.3.27 Wireless Terminal Authentication of the PISN (SS-WTAN) 9 7.3.28 C om m onIn f orm ation(A NF- CMN) 9 7.3.29 Call Priority Interruption (Protection) (SS-CPI(P) 9ISO/IEC 17877:2000(E) ISO/IEC 2000 All rights reserved v 7.3.30 Private User Mobility Registration (SS-PUMR) 10 7.3.31 Private Us
22、er Mobility Incoming Call (ANF-PUMI) 10 7.4 Interworking considerations 10 7.5 Overall SDL 10 8 ANF-PUMI stage 2 specification 10 8.1 Functional model 10 8.1.1 Functional model description 10 8.1.2 Description of Functional Entities 11 8.1.3 Relationship of functional model to basic call functional
23、model 11 8.2 Information flows 12 8.2.1 Definition of information flows 12 8.2.2 Relationship of information flows to basic call information flows 14 8.2.3 Information flow sequences 14 8.3 Functional Entity actions 19 8.3.1 Actions of FE1 19 8.3.2 Actions of FE2 19 8.3.3 Actions of FE3 20 8.3.4 Act
24、ions of FE4 20 8.3.5 Actions of FE5 20 8.4 Functional entity behaviour 20 8.4.1 Behaviour of FE1 21 8.4.2 Behaviour of FE2 22 8.4.3 Behaviour of FE3 23 8.4.4 Behaviour of FE4 24 8.4.5 Behaviour of FE5 25 8.5 Allocation of Functional Entities to physical equipment 26 8.6 Interworking considerations 2
25、6 9 ANF-PUMO stage 2 specification 26 9.1 Functional model 26 9.1.1 Functional model description 26 9.1.2 Description of Functional Entities 27 9.1.3 Relationship of functional model to basic call functional model 27 9.2 Information flows 27 9.2.1 Definition of information flows 27 9.2.2 Relationshi
26、p of information flows to basic call information flows 28 9.2.3 Information flow sequences 28 9.3 Functional Entity actions 29 9.3.1 Actions of FE1 29 9.3.2 Actions of FE2 29 9.4 Functional entity behaviour 29 9.4.1 Behaviour of FE1 29 9.4.2 Behaviour of FE2 30 9.5 Allocation of Functional Entities
27、to physical equipment 30 9.6 Interworking considerations 30ISO/IEC 17877:2000(E) vi ISO/IEC 2000 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. Na
28、tional bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual intere
29、st. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. In the field of information technology, ISO and IEC have establ
30、ished a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn
31、 to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. International Standard ISO/IEC 17877 was prepared by ECMA (as ECMA-283) and was adopted, under a
32、special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC.ISO/IEC 17877:2000(E) ISO/IEC 2000 All rights reserved vii Introduction This International Standard is one of a series of standards defi
33、ning services and signalling procedures applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This International Standard specifi
34、es the Private User Mobility Incoming Call (PUMI) and the Private User Mobility Outgoing Call (PUMO) additional network features. This International Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of IS
35、O/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. There is currently no equivalent service specified by ITU-T or ETSI for public ISDN.INTERNATIONAL STANDARD ISO/IEC 17877:2000(E) ISO/IEC 2000 All rights reserved
36、 1 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Private User Mobility (PUM) Call handling additional network features 1S c o p e This International Standard specifies the A
37、dditional Network Features (ANF) Private User Mobility Incoming Call (PUMI) and Private User Mobility Outgoing Call (PUMO), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. ANF-PUMI is an additiona
38、l network feature that directs incoming calls to a PUM user within a PISN regardless of the PUM users geographical location within the PISN, provided the PUM users location is known. ANF-PUMO is an additional network feature that permits the PISN to process call requests from a PUM user at the home
39、location, if required. Additional network feature specifications are produced in three stages, according to the method described in ETS 300 387. This International Standard contains the stage 1 and stage 2 specifications of ANF-PUMI and ANF-PUMO. The stage 1 specification (clauses 6 and 7) specifies
40、 the general feature principles and capabilities. The stage 2 specification (clauses 8 and 9) identifies the Functional Entities involved in the additional network features and the information flows between them. 2 Conformance In order to conform to this International Standard, a stage 3 standard sh
41、all specify signalling protocols and equipment behaviour that are capable of being used in a PISN which supports the additional network features specified in this International Standard. This means that, to claim conformance, a stage 3 standard is required to be adequate for the support of those asp
42、ects of clauses 6 and 7 (stage 1) and clauses 8 and 9 (stage 2) which are relevant to the interface or equipment to which the stage 3 standard applies. 3 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International
43、 Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members
44、 of IEC and ISO maintain registers of currently valid International Standards. ISO/IEC 11571:1998, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Addressing. ISO/IEC 11574:1994, Information technology Telecommunications and info
45、rmation exchange between systems Private Integrated Services Network Circuit-mode 64 kbit/s bearer services Service description, functional capabilities and information flows. ISO/IEC 11579-1:1994, Information technology Telecommunications and information exchange between systems Private Integrated
46、Services Network Part 1: Reference configuration for PISN exchanges (PINX). ISO/IEC 13872:1995, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Call diversion supplementary se
47、rvices. ISO/IEC 15428:1999, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exc
48、hange additional network feature. ISO/IEC 17875:2000, Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Private User Mobility (PUM) Registration supplementary service.ISO/IEC 17
49、877:2000(E) 2 ISO/IEC 2000 All rights reserved CCITT Rec. I.130,1988, Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN (Blue Book). ITU-T Rec. I.112:1993, Vocabulary of terms for ISDNs. ITU-T Rec. I.210:1993, Principles of telecommunication services supported by an ISDN and the means to describe them. ITU-T Rec. Z.100:1993, Specification and description language. 4 Definitions For the
