JB T 13102-2017 《数控刀架 性能试验规范》.pdf

相关资源

JB T 20208-2024 大蜜丸凉丸机.pdf

JB T 20207-2024 中药配方颗粒调剂设备.pdf

JB T20104-2022 片剂硬度仪.pdf

JB T20098-2022 抗生素玻璃瓶液体灌装联动线.pdf

JB T20205-2022 脱气仪.pdf

JB T20206-2022 生物制药反应过程温控装置.pdf

JB T20103-2022 蒸发浓缩器.pdf

JB T20099-2022 药物过滤洗涤干燥机.pdf

JB T20108-2022 药用脉冲式布袋除尘器.pdf

JB T20203-2022 药物溶液颜色测定仪.pdf

猜你喜欢

FORD WSK-M4D653-A-2005 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用受热稳定、20%玻璃纤维增强的聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSK-M4D654-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS SPHERE REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D654-A2)《40%玻璃珠增强的受热稳定的聚酰胺66 与标准FORD WSS-M99P.pdf

FORD WSK-M4D654-A2-2012 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS SPHERE REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D656-A-2008 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《耐高热 耐高冲击强度丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FO.pdf

FORD WSK-M4D659-A-2014 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND RECYCLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D660-A-2006 POLYPROPYLENE (PP) COPOLYMER COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用26%矿物填充的着色型聚丙烯（PP）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 使用WSS.pdf

FORD WSK-M4D660-A2-2006 POLYPROPYLENE (PP) COPOLYMER COLOR PIGMENTED GENERAL PURPOSE MOLDING COMPOUND TO BE USED WITH DORD WSS-M99P1111-A (Shown on WSK-M4D660-A Use WSS-M4D638-B).pdf

FORD WSK-M4D661-A-2010 PVC NBR MOLDING COMPOUND FLEXIBLE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用柔性聚氯乙烯（PVC） 丁腈橡胶（NBR）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D663-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 33% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《33%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf