JG T 420-2013 External thermal insulation composite systems based on rigid polyurethanes foam《硬泡聚氨酯板薄抹灰外墙外保温系统材料》.pdf

相关资源

JG T581-2023 建筑用热轧H型钢和剖分T型钢.pdf

JG T576-2021 防水卷材屋面用机械固定件.pdf

JG T578-2021 装配式建筑用墙板技术要求.pdf

JG T579-2021 建筑装配式集成墙面.pdf

JG T 568-2019 高性能混凝土用骨料.pdf

JG T 573-2020 混凝土和砂浆用再生微粉.pdf

JG T 574-2019 纤维增强覆面木基复合板.pdf

JG T 570-2019 装配式铝合金低层房屋及移动屋.pdf

JG T 225-2020 预应力混凝土用金属波纹管.pdf

JG T 398-2019 钢筋连接用灌浆套筒.pdf

猜你喜欢

GOST 22064-1976 Injection mould bases with take-off and ejector plate Design and dimensions《压力热塑铸造用带起出器板和起箱板压模坯料 结构及尺寸》.pdf

GOST 22065-1976 Plate-blanks of injection moulds Design and dimensions《压力热塑铸造用压模板坯料 结构及尺寸》.pdf

GOST 22066-1976 Clamping plate-blanks of injection moulds Design and dimensions《压力热塑铸造用压模紧固板坯料 结构及尺寸》.pdf

GOST 22067-1976 Cross-forming ejector plate-blanks of injection moulds Design and dimensions《压力热塑铸造用压模顶出器十字形板坯料 结构及尺寸》.pdf

GOST 22068-1976 Rectangular ejector plate-blanks of injection moulds Design and dimensions《压力热塑铸造用压模顶出器矩形板坯料 结构及尺寸》.pdf

GOST 22069-1976 Cross-forming supporting plate-blanks of injection moulds Design and dimensions《压力热塑铸造用压模十字形支撑板坯料 结构及尺寸》.pdf

GOST 22070-1976 Rectangular supporting plate-blanks of injection moulds Design and dimensions《压力热塑铸造用压模矩形支撑板坯料 结构及尺寸》.pdf

GOST 22071-1976 Struts of injection moulds Desing and dimensions《压力热塑铸造用压模支座 结构及尺寸》.pdf

GOST 22072-1976 Guide pins of injection moulds Design and dimensions《压力热塑铸造用压模导向柱 结构及尺寸》.pdf