SJ 21405-2018 《微电子封装金属外壳铝硅外壳镀覆工艺技术要求》.pdf

相关资源

CB T 3668-1995 电刷镀镍、铜工艺技术要求.pdf

CB T 3711-1995 船用柴油机零件焊补修复工艺技术要求.pdf

CB T 3731-1995 船用柴油机零件镀铬修复工艺技术要求.pdf

CB T 3367-1992 成品油船货油舱涂装工艺技术要求.pdf

JB T 5750-1991 气象仪器防盐雾、防潮湿、防霉菌工艺技术要求.pdf

JB T 5750-2014 气象仪器防盐雾、防潮湿、防霉菌 工艺技术要求.pdf

QJ 3013-1998 红外光学产品粘接密封工艺技术要求.pdf

QJ 3014-1998 航天电子电气产品聚硫橡胶灌封工艺技术要求.pdf

QJ 3015-1998 印制电路板图形转移工艺技术要求.pdf

SY T 6464-2000 水平井完井工艺技术要求.pdf

猜你喜欢

ASTM G174-2004 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact《磨擦环接触法测量材料耐磨性的标准试验方法》.pdf

ASTM G174-2004(2009)e1 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact《磨擦环接触法测量材料耐磨性的标准试验方法》.pdf

ASTM G174-2004(2017) Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact《通过循环接触磨料测量材料耐磨性的标准试验方法》.pdf

ASTM G175-2003 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications《医疗和应急设备用氧气调节器的引燃敏感性.pdf

ASTM G175-2003(2011) Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications《评估医疗和急救用氧气调节器.pdf

ASTM G175-2013 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications《评定医疗和紧急设施用.pdf

ASTM G176-2003 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test&8212 Cumulative Wear Method《用环块磨损试验评定耐塑料滑动磨损性的标准试验方法 累计磨损法》.pdf

ASTM G176-2003(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test&8212 Cumulative Wear Method《用环形结构块磨损测试－累积磨损法对塑料抗滑动磨损性分等的试.pdf

ASTM G176-2003(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test&x2014 Cumulative Wear Method《用环形结构块磨损测试-累积磨损法对塑料抗滑动磨损性分等的.pdf