SN 277 208-1983 PlasticsLaminated SheetsTypes and specifications《管道 平整密封面的带颈平焊法兰密封垫片 ND1 至 16，NW 10至400》.pdf

相关资源

HG 21530-1995 带颈平焊法兰手孔.pdf

HG 20616-1997 带颈平焊钢制管法兰（美洲体系）.pdf

HG 20594-1997 带颈平焊钢制管法兰（欧洲体系）.pdf

HG T 21530-2005 带颈平焊法兰手孔.pdf

GB T 9116-2010 带颈平焊钢制管法兰.pdf

HG 20594-1997 带颈平焊钢制管法兰(欧洲体系).pdf

GB T 15530.4-1995 铜合金带颈平焊法兰.pdf

HG 20616-1997（编制说明） 带颈平焊钢制管法兰（美洲体系）.pdf

GB T 9116.11-1988 PN 1.6MPa(16 bar) 凹凸面带颈平焊钢制管法兰.pdf

GB T 9116.2-2000 凹凸面带颈平焊钢制管法兰.pdf

猜你喜欢

NF X42-122-1998 Equipment Guidance on testing procedures for leaktightness 《设备 密封性测试程序指南 (欧洲标准EN 12298)》.pdf

NF X42-124-1998 Biotechnology Performance criteria for steam sterilizers and autoclaves 《生物技术 蒸气消毒器和高压灭菌器性能规范 (欧洲标准EN 12347)》.pdf

NF X42-130-1998 Biotechnology Performance criteria for pumps 《生物技术 泵的性能标准 (欧洲标准EN 12462)》.pdf

NF X42-131-1999 Biotechnology Performance criteria for shaft seals 《生物技术 轴密封件的性能标准》.pdf

NF X42-140-1999 Biotechnology Performance criteria for centrifuges 《生物技术 离心机的性能标准 (EN 12884)》.pdf

NF X42-141-1999 Biotechnology Performance criteria for cell disrupters 《生物技术 细胞破碎机的性能标准(EN 12885)》.pdf

NF X42-206-1998 Laboratories for research development and analysis Containment levels of microbiology laboratories areas of risk localities and physical safety requirements 《研究、开发和.pdf

NF X42-300-1990 Biotechnolgy Biological treatment of waste water Sewage treatment plant code of practice Prevention from biological risks to personnel and the environment 《生物工程 废水的.pdf

NF X42-301-1998 Biotechnology Modified organisms for application in the environment Guidance for the characterization of the genetically modified organism by analysis of the genomi.pdf