SN 640 879-1988 《交流高压设备内绝缘协调的规则和原理》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 969-1997 Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results《螺纹紧固件 轴向负荷疲劳试验 试验方法和试验结果评定》.pdf

DIN 97-2016 Slotted countersunk (flat) head wood screws《开槽沉头(平头)木螺钉》.pdf

DIN 9711-1-1963 Magnesium Extruded Sections Technical Conditions of Delivery《镁挤出型材 交货技术条件》.pdf

DIN 9711-2-1963 Magnesium Extruded Sections Design《镁压制型材 第2部分 设计》.pdf

DIN 9711-3-1963 Magnesium Extruded Sections Permissible Variations《挤压镁型材 允许偏差》.pdf

DIN 9715-1982 Magnesium semi-finished products Properties《镁半成品 性能》.pdf

DIN 974-1-2008 Diameters of counterbores - Manufacturing dimensions - Part 1 Hexagon socket head cap screws and screws with cheese head or pan head《沉孔直径 制造尺寸 第1部分 六角凹头螺钉和凸圆头螺钉或大柱头螺.pdf

DIN 974-2-1991 Diameters of counterbores for hexagon bolts screws and nuts manufacturing dimensions《六角螺栓、螺钉和螺母用沉头孔直径 制造尺寸》.pdf

DIN 9752-1983 Office machines identification cards concepts and classification《办公设备 标识卡 概念和分类》.pdf