SN T 4719-2016 Rules for quarantine treatment of lily bulb nematodes《进境百合种球传带检疫性线虫的检疫处理操作规程》.pdf

相关资源

SC T 8095-1997 渔船隔热层发泡操作规程.pdf

JIS C6010-1-1998 电子设备操作规程用机械构件研制的模块排序.第1部分：电子设备操作规程用机械构件研制的模块排序一般标准.pdf

JIS C6010-2-1998 电子设备操作规程用机械构件研制的模块排序.第2部分：分规范.25 mm 设备操作规程的接口配合尺寸.pdf

DB62 T 640-1999 桑蚕鲜茧仪评茧操作规程.pdf

JIS H9302-2007 陶瓷喷镀的推荐操作规程.pdf

JT 278-1995 船舶起重机安全技术操作规程.pdf

JT T 558-2004 船舶消防演习操作规程.pdf

CB 1278-1995 鱼雷爆发器装配安全操作规程.pdf

CB 1299-1998 爆炸螺栓安全操作规程.pdf

CB 1300-1998 带电爆活门的气瓶安装安全操作规程.pdf

猜你喜欢

SAE AS 81935 2B-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING WIDE INTERNALLY THREADED -65 TO +325 《 -65 至 +325℉宽内部螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 5A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING NARROW INTERNALLY THREADED -65 TO +325 《 -65至+325℉狭窄内螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 6A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING WIDE EXTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《 -65至 + 325℉耐蚀钢(CRES)宽外部螺纹自润滑和自对准杆端平纹轴.pdf

SAE AS 81935 7A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING WIDE INTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《 -65至+325℉的耐蚀钢宽内螺纹自润滑和自对准杆端平纹轴承》.pdf

SAE AS 81935 8-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING NARROW EXTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《带自调整自润滑耐腐蚀(CRES)窄型外螺纹钢杆端的滑动轴承(-65至.pdf

SAE AS 81935 9A-2011 BEARING PLAIN ROD END SELF-ALIGNING SELF-LUBRICATING NARROW INTERNALLY THREADED STEEL CORROSION RESISTANT (CRES)-65 TO +325 《 -65至 + 325℉耐蚀钢(CRES)窄内部螺纹自润滑和自对准杆端平纹.pdf

SAE AS 81935C-2011 Bearings Plain Rod End Self-Aligning Self-Lubricating General Specification For (-65 to +325 《(-65至+325℉)自润滑和自对准杆端平纹轴承的一般规格》.pdf

SAE AS 81936 1A-2006 BEARING PLAIN SELF-ALIGNING CU-BE BALL CRES RACE (WITH GROOVED RACE) -65 TO +350 《CRES轴承圈、CU滚珠、自调、滑动轴承-65到+350华氏度（凹槽轴承圈）》.pdf

SAE AS 81936 2A-2006 BEARING PLAIN SELF-ALIGNING CU-BE BALL CRES RACE (CHAMFERED RACE) -65 TO +350 《CRES轴承圈、CU滚珠、自调、滑动轴承-65到+350华氏度（斜面轴承圈）》.pdf