YS T 1010-2014 Test method for ring tensile strength of sintered porous metal《烧结金属多孔材料环拉强度的测定》.pdf

相关资源

YS T 649-2018 铜及铜合金挤制棒.pdf

YS T 679-2018 非本征半导体中少数载流子扩散长度的测试表面光电压法.pdf

YS T 662-2018 铜及铜合金挤制管.pdf

YS T 540.7-2018 钒化学分析方法第7部分：氧量的测定惰气熔融红外吸收法.pdf

YS T 988-2014 羧乙基锗倍半氧化物.pdf

YS T 540.5-2018 钒化学分析方法第5部分：杂质元素测定电感耦合等离子体原子发射光谱法.pdf

YS T 1288.3-2018 高纯锌化学分析方法第3部分：砷量的测定 氢化物发生-原子荧光光谱法.pdf

YS T 79-2018 硬质合金焊接刀片.pdf

YS T 584-2018 电极材料用铬、锆铜棒材.pdf

YS T 699-2018 铝电解用石墨化阴极炭块.pdf

猜你喜欢

NBN-EN 28849-1994 8750 Small craft Electrically operated bilge-pumps (ISO 8849 1990)《游艇 电动舱底泵（ISO 8849：1990）》.pdf

NBN-EN 28871-1993 1875 Elastomeric parts for aqueous parenteral preparations (ISO 8871 1988)《含水非肠道药配制剂用弹性件（ISO 8871：1988）》.pdf

NBN-EN 28872-1993 8750 Aluminium caps for transfusion infusion and injection bottles General requirements and test methods (ISO 8872 1988)《输血，输液及注射瓶的铝盖 一般要求和试验方法（ISO 8872：1988）》.pdf

NBN-EN 28877-1994 6875 Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN Basic Access InteSO .pdf

NBN-EN 28891-1992 6875 Dental casting alloys with noble metal content of 25 % up to but not including 75 % (ISO 8891 1990)《贵金属含量至少为25%但低于75%的牙科用铸造合金（ISO 8891：1990）》.pdf

NBN-EN 289-1994 7500 Rubber and plastics machinery Compression and transfer moulding presses Safety requirements for the design《塑料和橡胶用的压制和输送机设计的技术安全要求》.pdf

NBN-EN 28996-1994 4375 Ergonomics Determination of metabolic heat production (ISO 8996 1990)《人类工效学 代谢热量的测定（ISO 8996：1990）》.pdf

NBN-EN 29000-1990 6875 Quality management and quality assurance standards - Guidelines for selection and use《质量管理和质量保证 选则和使用导则》.pdf

NBN-EN 29000-3-1993 1250 Quality management and quality assurance standards Part 3 Guidelines for the application of ISO 9001 to the development supply and maintenance of software .pdf