E 265-1973 《集料 沥青的热制作》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 13761-2017 Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C《塑料管道和配件 使用温.pdf

ISO 13764-1996 Space data and information transfer systems - Standard formatted data units - Control authority procedures《空间数据和信息传输系统 标准格式化数据单元 控制权限程序》.pdf

ISO 13765-1-2004 Refractory mortars - Part 1 Determination of consistency using the penetrating cone method《耐熔灰浆 第1部分 使用渗透锥法测定一致性》.pdf

ISO 13765-2-2004 Refractory mortars - Part 2 Determination of consistency using the reciprocating flow table method《耐熔灰浆 第2部分 使用往复流动表法测定一致性》.pdf

ISO 13765-3-2004 Refractory mortars - Part 3 Determination of joint stability《耐熔灰浆 第3部分 连接稳定性的测定》.pdf

ISO 13765-4-2004 Refractory mortars - Part 4 Determination of flexural bonding strength《耐熔灰浆 第4部分 挠曲粘接强度的测定》.pdf

ISO 13765-5-2004 Refractory mortars - Part 5 Determination of grain size distribution (sieve analysis)《耐熔灰浆 第5部分 粒度分布的测定(筛析法)》.pdf

ISO 13765-6-2004 Refractory mortars - Part 6 Determination of moisture content of ready-mixed mortars《耐熔灰浆 第6部分 预拌灰浆的水分含量的测定》.pdf

ISO 13770-1997 Aluminium alloy gas cylinders - Operational requirements for avoidance of neck and shoulder cracks《铝合金气瓶 避免瓶颈和瓶肩裂纹的操作要求》.pdf