EN 1352-1996 Determination of Static Modulus of Elasticity under Compression of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structur.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 5401C-2004 Nickel Alloy Corrosion and Heat-Resistant Investment Castings 62Ni - 21 5Cr - 9 0Mo - 3 6Cb (Nb) Vacuum Melted Vacuum Cast As Cast (UNS N26625)《UNS N26625经真空融化和真.pdf

SAE AMS 5402C-2004 Nickel Alloy Corrosion and Heat-Resistant Investment Castings 62Ni - 21 5Cr - 9 0Mo - 3 6Cb (Nb) As Cast (UNS N26010)《采用62Ni 21 5Cr 9 0Mo 3 6Cb (Nb) 铸造的熔模铸造法的耐腐蚀.pdf

SAE AMS 5410B-2010 Nickel Alloy Corrosion and Heat Resistant Investment Castings 61Ni - 16Cr - 8 5Co - 1 8Mo - 2 6W - 0 85Cb - 3 4Ti - 1 8Ta - 3 4Al - 0 010B - 0 05Zr Vacuum Melted.pdf

SAE AMS 5410C-2017 Nickel Alloy Corrosion and Heat Resistant Investment Castings 61Ni - 16Cr - 8 5Co - 1 8Mo - 2 6W - 0 85Cb (Nb) - 3 4Ti - 1 8Ta - 3 4Al - 0 010B - 0 05Zr Vacuum M.pdf

SAE AMS 5412A-2012 Steel Castings Vacuum Melted Vacuum Cast Investment Corrosion-Resistant 13Cr - 8 0Ni - 2 2Mo - 1 1Al (195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homog.pdf

SAE AMS 5441B-2016 Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings Ni - 18Cr - 2 8Mo - 5 5Cb(Nb) - 0 70Ti - 1 50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted.pdf

SAE AMS 5442B-2017 Nickel Alloy Corrosion and Heat-Resistant Bars Forgings and Rings Ni - 18Cr - 2 8Mo - 5 5Cb(Nb) - 0 70Ti - 1 50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted.pdf

SAE AMS 5500E-2002 Steel Corrosion-Resistant Laminated Sheet Surface Bonded (UNS S30200)《耐腐蚀的表面粘结的叠层钢板》.pdf

SAE AMS 5501E-2002 Steel Corrosion Resistant Sheet Strip and Foil 19Cr - 9 5Ni (304) Cold Rolled 125 ksi (862 MPa) Tensile Strength (UNS S30400)《UNS S30400 抗张强度为125 ksi(862 MPa)的含1.pdf