1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs-RCCBs for household and similar usesBS EN 63024:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63024 April 2018 ICS 29.120.50 Sup
2、ersedes EN 50557:2011 English Version Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses (IEC 63024:2017) Exigences pour les dispositifs refermeture automatique (DRA) pour disjoncteurs, ID et DD, pour usages domestiques et analogu
3、es (IEC 63024:2017) Anforderungen an automatische Wiedereinschalteinrichtungen fr Leitungsschutzschalter, RCBOs, RCCBs fr Hausinstallationen und hnliche Zwecke (IEC 63024:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Inte
4、rnal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any
5、 CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the off
6、icial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
7、 Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung
8、CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 63024:2018 E National forewordThis British Standard is the UK implementation of EN 63024:2018. It is derived f
9、rom IEC 63024:2017. It supersedes BS EN 50557:2011, which will be withdrawn on 17 January 2021.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags .The UK participation in its
10、preparation was entrusted to Technical Committee PEL/23/1, Circuit breakers and similar equipment for household use.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contrac
11、t. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 91381 5ICS 29.120.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the author
12、ity of the Standards Policy and Strategy Committee on 31 August 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 63024:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63024 April 2018 ICS 29.120.50 Supersedes EN 50557:2011 English Version Requiremen
13、ts for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses (IEC 63024:2017)Exigences pour les dispositifs refermeture automatique (DRA) pour disjoncteurs, ID et DD, pour usages domestiques et analogues (IEC 63024:2017) Anforderungen an automatische
14、 Wiedereinschalteinrichtungen fr Leitungsschutzschalter, RCBOs, RCCBs fr Hausinstallationen und hnliche Zwecke (IEC 63024:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f
15、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in
16、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national
17、electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal
18、, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science
19、23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 63024:2018 E BS EN 63024:2018EN 63024:2018 (E) 2 European forewordThe text of document 23E/1037/FDIS, future edition 1 of IEC 63024, prepared by IEC/SC 23E “Ci
20、rcuit-breakers and similar equipment for household use“ of IEC/TC 23 “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 63024:2018. A draft amendment, which covers common modifications to IEC 63024 (23E/1037/FDIS), was prepared by CLC/TC 23E “Circui
21、t breakers and similar devices for household and similar applications“ and approved by CENELEC. The following dates are fixed: latest date by which this document has tobe implemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2019-01-17 latest date by whi
22、ch the nationalstandards conflicting with this documenthave to be withdrawn(dow) 2021-01-17 This document supersedes EN 50557:2011. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 63024:2017 are prefixed “Z”. This standard covers the Principle Elements of
23、 the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2014/35/EU). This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(
24、s). For the relationship with EU Directive(s) see informative Annex ZZA and Annex ZZB, which are integral parts of this document. Endorsement notice The text of the International Standard IEC 63024:2017 was approved by CENELEC as a European Standard with agreed common modifications. In the official
25、version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60085 NOTE Harmonized as EN 60085. IEC 60112:2003 NOTE Harmonized as EN 60112:2003 (not modified). IEC 60112:2003/AMD1:2009 NOTE Harmonized as EN 60112:2003/A1:2009 (not modified). IEC 60364-6:2006 NOTE
26、Harmonized as HD 60364-6:2007 (modified). IEC 60384-14:2013 NOTE Harmonized as EN 60384-14:2013 (not modified). IEC 60695-2-10:2013 NOTE Harmonized as EN 60695-2-10:2013 (not modified). IEC 60998-2-3 NOTE Harmonized as EN 60998-2-3. IEC 61000-3-2 NOTE Harmonized as EN 61000-3-2. IEC 61000-3-3 NOTE H
27、armonized as EN 61000-3-3. IEC 62423 NOTE Harmonized as EN 62423 ISO 306 NOTE Harmonized as EN ISO 306. BS EN 63024:2018EN 63024:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to i
28、n the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publicat
29、ion has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60065 (mod) 2014 Audio, video an
30、d similar electronic apparatus - Safety requirements EN 60065 2014 IEC 60384 Series Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 EN 60384 Series IEC 60664-1 2007 Insulation coordination for equipment within low-vo
31、ltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60664-3 - Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 2017 IEC 60898-1 2015 Electrical accessories - Circuit-b
32、reakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation - - IEC 60898-2 2016 Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation - - IEC 60947-5-1 -
33、 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices EN 60947-5-1 2016 IEC 60950-1 (mod) - Information technology equipment - Safety - Part 1: General requirements EN 60950-1 2006 IEC 61000-4-2 - Electromagneti
34、c compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 2009 IEC 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity testEN 61000-4
35、-3 2006 BS EN 63024:2018EN 63024:2018 (E) 4 Publication Year Title EN/HD Year IEC 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 2012 IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Par
36、t 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 2014 IEC 61000-4-6 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fieldsEN 61000-4-6 2014 IEC 61000-4-16 - Electromagnet
37、ic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz EN 61000-4-16 2016 IEC 61008-1 (mod) 2010 Residual current operated circuit-breakers without integral overcurrent protection for ho
38、usehold and similar uses (RCCBs) - Part 1: General rules EN 61008-1 2012 +A1 (mod) 2012 +A1 2014 +A2 (mod) 2013 +A2 2014 IEC 61009-1 (mod) 2010 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules EN 61009-1 20
39、12 +A1 (mod) 2012 +A1 2014 +A2 (mod) 2013 +A2 2014 IEC 61189-2 - Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures EN 61189-2 2006 IEC 61543 1995 Residual current-operated prot
40、ective devices (RCDs) for household and similar use - Electromagnetic compatibilityEN 61543 1995 +A1 2004 + A11 2003 +A2 2005 +A2 2006 IEC 61558 Series Safety of transformers, reactors, power supply units and combinations thereof EN 61558 Series IEC 62019 - Electrical accessories - Circuit-breakers
41、and similar equipment for household use - Auxiliary contact units EN 62019 1999 CISPR 14-1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission EN 55014-1 2017 ISO 7000 2014 Graphical symbols for use on equipment - Registere
42、d symbols - - BS EN 63024:2018EN 63024:2018 (E) 5 Annex ZZA (informative) Relationship between this European standard and the essential requirements of Directive 2014/30/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under the European Commission standardisation request
43、C(2016) 7641 final of 30.11.20161, (M/552), as regards harmonised standards in support of Directive 2014/30/EU relating to electromagnetic compatibility, to provide one voluntary means of conforming to essential requirements of Directive 2014/30/EU of the European Parliament and of the Council of 26
44、 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZA.1 conf
45、ers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Table ZZA.1 Correspondence between this European standard and the Essential Requirements set out in Directive 2014/30/EU
46、 2014 OJ L96 Essential requirements of Directive 2014/30/EU Clause(s) / sub-clause(s) of this EN Remarks / Notes Annex I. 1(a) (electromagnetic disturbances) 9.22.5 For CISPR 14-1, the text on the statistical evaluation of mass produced products in Clause 7 does not apply. Annex I. 1(b) (electromagn
47、etic immunity) 8.15-9.22 WARNING 1: Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Officia
48、l Journal of the European Union. WARNING 2: Other Union legislation may be applicable to the product(s) falling within the scope of this standard. 1COMMISSION IMPLEMENTING DECISION C(2016) 7641 final of 30.11.2016 on a standardisation request to the European Committee for Standardisation, to the Eur
49、opean Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility. BS EN 63024:2018EN 63024:2018 (E) 6 Annex ZZB (informative) Relationship between this European standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This Europe
