MNOSZ 1509-1951 《手工工具 可以宽弯曲的锤》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 5331-1991 Acetylene installations Safety requirements for construction of gas generators《乙炔装置 气体发生器的结构安全要求》.pdf

TCVN 5332-1991 Acetylene installations Safety requirements for construction of basic technological equipment《乙炔装置 基本技术设备的结构安全要求》.pdf

TCVN 5334-2007 Electrical apparatus for petroleum and petroleum products terminal Requirements on safety in design installation and operation《石油和石油产品终端电气装置 设计 安装和运行中的安全要求》.pdf

TCVN 5335-2009 Powdery active carbon Test method《粉状活性炭 试验方法》.pdf

TCVN 5337-1991 Metallic corrosion Atmosferical errosion properdes Clasification《金属腐蚀 大气腐蚀性 分类》.pdf

TCVN 5338-1991 Anti Corrosive protection General requirements for protection of metal《防腐保护 金属保护一般要求》.pdf

TCVN 5339-1991 Anti Corrosive protection atmospherie laborator General requirements《防腐保护 大气实验室 一般要求》.pdf

TCVN 5342-1991 Metal cutting machines methods for control of straight for ward of surfaces《金属切割机 表面榫槽直线控制方法》.pdf

TCVN 5343-1991 METAL CUTTING MACHINES Methods for control of perpendicular of axle relatively plane《金属切割机 轴向相对平面垂直控制方法》.pdf