MNOSZ 15549-1953 《手术器具 PEAN型可弯曲的血管钳》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 6627-15-2011 Rotating electrical machines Part 15 Impulse voltage withstand levels of form-wound stator coils for rotating a c machines《旋转电机 第15部分 交流旋转电机用定子成型线圈的耐冲击电压水平》.pdf

TCVN 6627-18-1-2011 Rotating electrical machines Part 18-1 Functional evaluation of insulation systems General guidelines《旋转电机 第18-1部分 绝缘系统的功能性评价 一般指南》.pdf

TCVN 6627-18-21-2011 Rotating electrical machines Part 18 Functional evaluation of insulation systems Section 21 Test procedures for wire-wound windings Thermal evaluation and clas.pdf

TCVN 6627-2-1-2010 Rotating electrical machines Part 2-1 Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)《旋转电机 第2-1部分 试验.pdf

TCVN 6627-2A-2001 Rotating electrical machines Part 2 Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehric.pdf

TCVN 6627-3-2010 Rotating electrical machines Part 3 Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines《旋转电机 第3部分 用蒸汽涡轮机或燃气涡轮机驱动的同.pdf

TCVN 6627-30-2011 Rotating electrical machines Part 30 Efficiency classes of single-speed three-phase cage-induction motors (IE-code)《旋转电机 第30部分 单速三相笼型感应电动机的有效等级(IE代码)》.pdf

TCVN 6627-31-2011 Rotating electrical machines Part 31 Selection of energy-efficient motors including variable speed applications Application guide《旋转电机 第31部分 包括变速设备的节能电动机的选择 应用指南》.pdf

TCVN 6627-5-2008 Rotating electrical machines Part 5 Degrees of protection provided by the integral design of rotating electrical machines (IP code) Classification《旋转电机 第5部分 旋转电机整体.pdf