MNOSZ 2334-1953 《深底头部的生铁螺母》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 148-1-2010 1875 Metallic materials - Charpy pendulum impact test - Part 1 Test method《金属材料 夏比摆锤冲击试验 试验方法》.pdf

EN ISO 148-1-2016 en Metallic materials - Charpy pendulum impact test - Part 1 Test method《金属材料-夏比摆锤冲击试验第1部分 试验方法(ISO 148-1 2016)》.pdf

EN ISO 148-2-2008 374 Metallic materials - Charpy pendulum impact test - Part 2 Verification of testing machines《金属材料 夏比摆式冲击试验 第2部分 试验机的验证［代替 CEN EN 10045-2］》.pdf

EN ISO 148-2-2016 en Metallic materials - Charpy pendulum impact test - Part 2 Verification of testing machines《金属材料-夏比摆锤冲击试验第2部分 试验机检定(ISO 148-2 2016)》.pdf

EN ISO 148-3-2008 346 Metallic materials - Charpy pendulum impact test - Part 3 Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum.pdf

EN ISO 148-3-2016 en Metallic materials - Charpy pendulum impact test - Part 3 Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum .pdf

EN ISO 1481-2011 en Slotted pan head tapping screws《开槽盘头自攻螺钉》.pdf

EN ISO 1482-2011 en Slotted countersunk (flat) head tapping screws《开槽埋头(平头)自攻螺钉》.pdf

EN ISO 1483-2011 en Slotted raised countersunk (oval) head tapping screws《开槽半埋头(椭圆头)自攻螺钉》.pdf