MNOSZ 5317-1951 《钢铁护栏，护栏设备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 28112-1989 Machines for bottles extraction from and packing into boxes Types main parameters and technical requirements《将玻璃瓶提出和放入箱内的机器 型式，基本参数和技术要求》.pdf

GOST 28113-1989 Workover and production hoisting units for oil and gas wells Types and basic parameters《开发和修理油井和气井用起重装置 型式和基本参数》.pdf

GOST 28114-1989 Cables Method of measuring partial discharges《电缆 局部放电测量方法》.pdf

GOST 28115-1989 Drying apparatus and plants Classification《干燥器具和装置 分级》.pdf

GOST 28116-1995 Catering equipment Distribution containers Main and joint dimensions and technical requirements《公共饮食企业用的实用容器 基本尺寸和连接尺寸，技术要求》.pdf

GOST 28117-1989 Unplasticized polyvinylchloride pipes Types and assortment《未塑炼聚氯乙烯管 类型和规格》.pdf

GOST 28119-1989 Building-block machines Adapters and adjustable bushes and locking nuts Design《组合机床 可调过渡套与锁紧螺母 结构》.pdf

GOST 28120-1989 Nc metal-cutting machine tools Prismatic shanks of holders Design《数控金属切削机床 刀杆的棱形尾部结构》.pdf

GOST 28121-1989 Spiral classificators Types basic parameters dimensions and specifications《螺旋分选机 型式、基本参数、尺寸和技术要求》.pdf