MNOSZ 8841-1955 《烟道拐弯儿》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS-ISO 9318-4-1991 Information technology Intelligent Peripheral Interface Part 4 Device generic command set for magnetic tape drives《信息技术智能外围接口 第4部分：磁带驱动器用设备生成指令集》.pdf

SIS SS-ISO 9361-1-1992 Indexable inserts for cutting tools Ceramic inserts with rounded corners Part 1 Dimensions of inserts without fixing hole《可转位切割刀具 可转位陶瓷刀片 第1部分：无孔刀片尺寸》.pdf

SIS SS-ISO 9361-2-1992 Indexable inserts for cutting tools Ceramic inserts with rounded corners Part 2 Dimensions of inserts with cylindrical fixing hole《可转位切割刀具 可转位陶瓷刀片 第2部分：带固定.pdf

SIS SS-ISO 9362-1989 Banking Banking telecommunication messages Bank identifier codes《银行业 银行电信资讯 银行识别码》.pdf

SIS SS-ISO 9367-1-1991 Lashing and securing arrangements on road vehicles for sea transportation on Ro Ro ships General requirements Part 1 Commercial vehicles and combinations o.pdf

SIS SS-ISO 9374-1-1992 Cranes Information to be provided Part 1 General《起重机 提供的信息 第1部分：总则》.pdf

SIS SS-ISO 9374-4-1992 Cranes Information to be provided Part 4 Jib cranes《起重机 提供的信息 第4部分：动臂起重机》.pdf

SIS SS-ISO 9374-5-1992 Cranes Informatian to be provided Part 5 Overhead travelling cranes and portal bridge cranes《起重机 提供的信息 第5部分：桥式起重机和门桥式起重机》.pdf

SIS SS-ISO 9404-1-1992 Enclosures for protection against ionizing radiation Lead shielding units for 150 mm 200 mm and 250 mm thick walls Part 1 Chevron units of 150 mm and200 mm.pdf