HB 7344.19-1996 《数控机床用夹具元件 中型二阶长方形定位支承》.pdf

相关资源

JIS B6190-4-2008 机床试验规程.第4部分数控机床的圆弧检验.pdf

HB 6829-1993 数控机床用二齿直柄立铣刀 d=3~10mm.pdf

HB 6830-1993 数控机床用二齿削平型直柄立铣刀 d=6~20mm.pdf

HB 6831-1993 数控机床用三齿削平型直柄立铣刀 d=6~28mm.pdf

HB 6837-1993 数控机床用三齿端刃过中心莫氏锥柄立铣刀 d=14~28mm.pdf

HB 6838-1993 数控机床用四齿莫氏锥柄立铣刀 d=14~50mm.pdf

HB 6839-1993 数控机床用六齿莫氏锥柄立铣刀 d=22~63mm.pdf

HB 6840-1993 数控机床用普通立铣刀技术条件.pdf

HB 6949-1994 数控机床用可转位复合夹紧外圆车刀.pdf

HB 6950-1994 数控机床用可转位复合夹紧75'。偏头端面车刀.pdf

猜你喜欢

GOST 12445-1980 Hydraulic and pneumatic drives and lubricating systems Nominal pressures《液压和气动传动装置和润滑系统 标称压力》.pdf

GOST 12446-1980 Hydraulic and pneumatic drives and lubricating systems Nominal freguecies of rotation《液压和气动传动装置和润滑系统 标称旋转频率》.pdf

GOST 12447-1980 Hydraulic and pneumatic drives and lubricating systems Standard diameters《液压和气压驱动装置及润滑系统 公称直径》.pdf

GOST 12448-1980 Hydraulic and pneumatic drives and lubricating systems Nominal volumes《液压和气动传动装置和润滑系统 标称容积》.pdf

GOST 12449-1980 Pneumatic drives Nominal flows of air《气压驱动装置 公称空气流量》.pdf

GOST 12450-1982 A c circuit-breakers for voltages from 110 to 750 kV Switching of overhead lines on no-load Technical requirements and test methods《110-750kV电压用交流断路器 空载架空线开关 技术要求和测.pdf

GOST 12453-1977 Linen and half-linen fabrics and piece goods primary packing and marking《麻和半麻织物和布匹 原始包装和标识》.pdf

GOST 12456-1983 Fibre for grinding disks Specifications《砂轮用纤维 规范》.pdf

GOST 12457-1977 Wood blanks for oars Specifications《架橹用的木坯料 技术条件》.pdf