HD 305-1975 IEC Reference Coupler for the Measurement of Hearing Aids Using Earphones Coupled to the Ear by Means of Ear Inserts《用耳塞耦合到人耳的耳机的方法测量耳机助听器用IEC参考耦合器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D884-A2-2010 POLYPROPYLENE (PP) COPOLYMER 5% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D884-A1)《汽车内部用5%.pdf

FORD WSB-M4D889-A1-2011 POLYVINYL CHLORIDE (PVC) RIGID 65 D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《坚硬的 硬度为65D的聚氯乙烯PVC) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D891-A1-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺混合物(PPE+PA)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D891-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HIGH FLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺混合物(PPE+PA)高流动性模塑材料 与福特WSS-M99P1.pdf

FORD WSB-M4D898-A-2006 POLYPROPYLENE (PP) COPOLYMER TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A《半透明聚丙烯（PP）共聚物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D900-A-2010 POLYPHENYLENE SULFIDE (PPS) 45% MINERAL MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%矿物增强的聚苯硫醚（PPS）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D908-A-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D909-A1-2012 POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) CALENDERED SHEET VACUUM FORMABLE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部可形成真空的聚氯乙烯+丙烯腈混合物(PVC+ABS)压光板 与.pdf

FORD WSB-M4D911-A-2011 POLYPROPYLENE (PP) COPOLYMER 100% RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 100%回收的模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WRS-M.pdf