I.S. 32-1963 HARD GLOSS AND ENAMEL PAINTS《硬珐郎和瓷漆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SN 212 757-1980 《建筑物内部给水用节流阀》.pdf

SN 212 781-1982 Taper pins with thread and constant cone part《纺织品 色牢度试验 第N05部分：耐硫熏牢度》.pdf

SN 212 784-1982 Taper pins with thread and constant threaded part《建筑金属》.pdf

SN 212 800-1982 Slotted round head wood screws《技术图纸 文字说明》.pdf

SN 212 801-1982 Slotted countersunk (flat) head wood screws《直径5 至 40 的无头螺栓》.pdf

SN 212 802-1982 Slotted raised countersunk (oval) head wood screws《无扁尾的刀具锥度 米制锥度2200的刀柄和套筒》.pdf

SN 212 803-1982 Hexagon wood screws《绕组线 额定直径在1 60mm以上圆线和厚度低于5 6mm扁形线的回弹角检验方法》.pdf

SN 213 102-1980 Grundlage dieser Norm ist die von der Internationalen Organi-sation für Normung ISO herausgegebene Empfehlung ISO R 1051 -1969 sowie DIN 660 -19.pdf

SN 213 126-1980 Grundlage dieser Norm ist die von der Internationalen Organi-sation für Normung ISO herausgegebene Empfehlung ISO R《小型拖车的钢丝轮胎》.pdf