1、 IEC 60884-2-7 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Plugs and socket-outlets for household and similar purposes Part 2-7: Particular requirements for cord extension sets Prises de courant pour usages domestiques et analogues Partie 2-7: Exigences particulires pour les cord
2、ons prolongateurs IEC60884-2-7:2011/A1:2013AMENDMENT 1 AMENDEMENT 1 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or me
3、chanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the
4、address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la p
5、hotocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit nationa
6、l de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
7、 International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Usef
8、ul links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/
9、justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 t
10、erms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, ple
11、ase contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos d
12、es publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet
13、 de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la
14、CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et e
15、n franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous:
16、 csciec.ch. IEC 60884-2-7 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Plugs and socket-outlets for household and similar purposes Part 2-7: Particular requirements for cord extension sets Prises de courant pour usages domestiques et analogues Partie 2-7: Exigences particulires po
17、ur les cordons prolongateurs INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE D ICS 29.120.30 PRICE CODE CODE PRIX ISBN 978-2-83220-869-4 AMENDMENT 1 AMENDEMENT 1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission E
18、lectrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60884-2-7 Amend.1 IEC:2013 FOREWORD This amendment has been prepared by subcommittee
19、 23B: Plugs, socket-outlets and switches, of IEC technical committee 23: Electrical accessories. The text of this amendment is based on the following documents: FDIS Report on voting 23B/1105/FDIS 23B/1108/RVD Full information on the voting for the approval of this amendment can be found in the repo
20、rt on voting indicated in the above table. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date,
21、the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. _ 1 Scope Replace in the last paragraph “should be” by “are” Add at the end of the final paragraph the following Note 3 as follows: NOTE 3 In the following country, cord extension sets comprising a socket outl
22、et for class II equipment are not permitted; socket-outlets in cord extension sets shall always be Class 1 as defined in EN 61140: DK, UK. 3 Definitions 3.12 Replace the existing text of Note 101 by the new text as follows: NOTE101 The term “plug“ covers plugs and fused plugs. The term “socket-outle
23、t“ covers also socket-outlet with incorporated components such as switches and fuses etc. (see also 14.22). 4 General requirements Replace the last paragraph by the following: Components such as plugs, socket-outlets (including multiple socket-outlets) and flexible cables of the cord extension sets
24、shall be fully compliant with, and have been verified against, the relevant product standards for those components. 5 General remarks on tests 5.1 Add at the end of the subclause a new Note as follows: 60884-2-7 Amend.1 IEC:2013 3 NOTE In the following country, the following tests are carried out on
25、 samples of the cord extension set in accordance with the sampling requirements specified in Clauses 5, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 28, 29 and 30: ZA. 6 Ratings 6.2 Replace the existing text in item c) by the following new text: c) the rated current of the overcurrent protective device h
26、aving the smallest rated current. 8 Marking 8.1 Delete the existing instructions “Addition after the fourth dashed text:“ and “Addition after the fifth dashed text:“ and the existing Notes 101 and 102. Add, at the beginning of the subclause, the following instructions: Delete the first three dashed
27、texts. Add the following paragraphs after the 7th dashed text: For cord extension sets, the marking of the manufacturers or responsible vendors name, trademark or identification mark shall be applied only if the manufacturer of the cord extension set is different to the manufacturer of the socket-ou
28、tlet. NOTE 101 The marking of the name, trade mark or identification mark of the manufacturer or responsible vendor may for example be applied on a sleeve or label provided around the cord. For a cord extension set, the type reference, which may be a catalogue number, shall be placed on the smallest
29、 packaging unit. Add after the word “MAX“: This marking shall be durable and easily legible with normal or corrected vision, without additional magnification. Renumber the existing Note 103 as the new Note 102. 14 Construction of plugs and portable socket-outlets 14.1 Add “DE” at the end of Note 1.
30、Add the following new Note 3 after the second paragraph: NOTE 3 In the following country BS 1363 applies to plugs and socket outlets: UK. Add the following new Note 4 after the third paragraph: NOTE 4 In the following country BS 1363 applies to fused plugs: UK. Add the following new Note 5 after the
31、 fourth paragraph: NOTE 5 In the following country, flexible cords to BS6500 or BS7919 are also permitted: UK. 14.2 Add a new Note 4 after Note 3: NOTE 4 In the following country the minimum cross-sectional area is 1 mm2for 5 m maximum length and 1,5 mm2for 30 m maximum length: CH. 4 60884-2-7 Amend
32、.1 IEC:2013 14.3 Replace the existing Note by: NOTE 1 In the following country the last paragraph of 14.3 is not applicable as it is possible to insert a 10 A, 13 A or 16 A plug into a 10 A, 13 A or 16 A socket-outlet: DK. Add a new Note 2 after Note 1 as follows: NOTE 2 In the following country cor
33、d extension sets comprising of 3 or more socket outlets shall be fitted with a protective overcurrent device: ZA. 19 Temperature rise Add a new Note as follows: NOTE In the following country overcurrent protection is electrically shorted out with a link of negligible resistance for the execution of
34、the temperature rise test: ZA. _ 6 60884-2-7 Amend.1 CEI:2013 AVANT-PROPOS Le prsent amendement a t tabli par le sous-comit 23B: Prises de courant et interrupteurs, du comit dtudes 23 de la CEI: Petit appareillage. Le texte de cet amendement est issu des documents suivants: FDIS Rapport de vote 23B/
35、1105/FDIS 23B/1108/RVD Le rapport de vote indiqu dans le tableau ci-dessus donne toute information sur le vote ayant abouti lapprobation de cet amendement. Le comit a dcid que le contenu de cet amendement et de la publication de base ne sera pas modifi avant la date de stabilit indique sur le site w
36、eb de la CEI sous “http:/webstore.iec.ch“ dans les donnes relatives la publication recherche. A cette date, la publication sera reconduite, supprime, remplace par une dition rvise, ou amende. _ 1 Domaine dapplication Remplacer, dans le dernier alina, “il convient que.soient adapts” par “sont adapts”
37、. Ajouter, la fin de lalina final, la Note 3 suivante comme suit: NOTE 3 Dans les pays suivants, les cordons prolongateurs comportant un socle de prise pour un quipement de classe II ne sont pas autoriss; les socles de prises sur les cordons prolongateurs doivent toujours tre de Classe 1, tel que df
38、ini par la EN 61140: DK, UK. 3 Dfinitions 3.12 Remplacer le texte existant de la Note 101 par le nouveau texte suivant: NOTE 101 Le terme “fiche“ couvre les fiches et les fiches avec fusibles. Le terme “socle” couvre aussi les socles avec composants incorpors comme les interrupteurs et les fusibles,
39、 etc. (voir aussi 14.22). 4 Exigences gnrales Remplacer le dernier alina par ce qui suit: Les composants tels que les fiches, les socles (y compris les socles multiples) et les cbles flexibles des cordons prolongateurs doivent tre entirement conformes avec les normes produits appropries pour ces com
40、posants et doivent avoir t vrifis selon ces normes. 60884-2-7 Amend.1 CEI:2013 7 5 Gnralits sur les essais 5.1 Ajouter, la fin du paragraphe, une nouvelle Note comme suit: NOTE Dans le pays suivant, les essais suivant sont mens sur des chantillons de cordons prolongateurs en accord avec les exigence
41、s dchantillonnage dfinies aux Articles 5, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 28, 29 et 30: ZA. 6 Valeurs assignes 6.2 Remplacer le texte existant dans le point c) par le nouveau texte suivant: c) le courant assign du dispositif de protection contre les surintensits ayant le plus petit courant a
42、ssign. 8 Marques et indications 8.1 Supprimer les instructions existantes, “Addition aprs le quatrime tiret“ et “Addition aprs le cinquime tiret:“ et les Notes 101 et 102 existantes. Ajouter, au dbut du paragraphe, les instructions suivantes: Supprimer les trois premiers tirets. Ajouter les alinas s
43、uivants aprs le 7me tiret: Pour les cordons prolongateurs, le marquage du nom du fabricant ou du vendeur responsable, de la marque de fabrique ou de la marque didentification ne doit tre appliqu que si le fabricant du cordon prolongateur est diffrent du fabricant du socle. NOTE 101 Le marquage du no
44、m, de la marque de fabrique ou de la marque didentification du fabricant ou du vendeur responsable peut tre appliqu par exemple sur un manchon ou une tiquette en place autour du cble souple. La rfrence du type dun cordon prolongateur, qui peut tre un numro de catalogue, doit tre place sur le plus pe
45、tit emballage. Ajouter, aprs le terme “MAX“: Ce marquage doit tre durable et facilement lisible pour une vision normale ou corrige, sans grossissement supplmentaire. Renumroter la Note 103 existante comme la nouvelle Note 102. 14 Construction des fiches et socles mobiles 14.1 Ajouter “DE” la fin de
46、la Note 1. Ajouter la nouvelle Note 3 suivante aprs le deuxime alina: NOTE 3 Dans le pays suivant, la norme BS 1363 sapplique aux fiches et aux socles de prises: UK. Ajouter la nouvelle Note 4 suivante aprs le troisime alina: 8 60884-2-7 Amend.1 CEI:2013 NOTE 4 Dans le pays suivant, la norme BS 1363
47、 sapplique aux fiches avec fusibles: UK. Ajouter la nouvelle Note 5 suivante aprs le quatrime alina: NOTE 5 Dans le pays suivant, les cordons flexibles selon la norme BS6500 ou BS7919 sont aussi autoriss: UK. 14.2 Ajouter la nouvelle Note 4 aprs la Note 3: NOTE 4 Dans le pays suivant, la section min
48、imale est de 1 mm2pour une longueur maximale de 5 m et 1,5 mm2pour une longueur maximale de 30 m: CH. 14.3 Remplacer la Note existante par: Note 1 Dans le pays suivant, le dernier alina de 14.3 nest pas applicable, car il est possible dinsrer une fiche de 10 A, 13 A ou 16 A dans un socle de 10 A, 13
49、 A ou 16 A: DK. Ajouter une nouvelle Note 2 aprs la Note 1, comme suit: NOTE 2 Dans le pays suivant, les cordons prolongateurs comprenant 3 prises ou plus doivent tre quips dun dispositif de protection contre les surintensits: ZA. 19 Echauffement Ajouter une nouvelle Note comme suit: NOTE Dans le pay