MT 277-1994 Harmful gas existing in mine air Detection method of hydrogen sulfide（detector tube method）《矿井空气中有害气体 硫化氢测定方法（检测管法）》.pdf

相关资源

MT T 1201.2-2023 煤矿感知数据联网接入规范 第2部分：重要设备.pdf

MT T 1199-2023 煤矿用防爆柴油机无轨胶轮运输车辆通用安全技术条件.pdf

MT T 1208-2023 煤矿在用产品安全检测检验规范 摩擦式提升机系统.pdf

MT T 1207-2023 煤矿在用产品安全检测检验规范 缠绕式提升机系统.pdf

MT T 1198-2023 煤矿井下人员位置监测系统使用与管理规范.pdf

MT T 1206-2023 煤矿在用产品安全检测检验规范 提升绞车系统.pdf

MT T 1201.4-2023 煤矿感知数据联网接入规范 第4部分：水害防治.pdf

MT T 1202.1-2023 煤矿数据采集与传输技术要求 第1部分：总体要求.pdf

MT T 1205-2023 煤矿在用产品安全检测检验规范 主要通风机系统.pdf

MT T 1204-2023 煤矿在用产品安全检测检验规范 主排水系统.pdf

猜你喜欢

JUS C H3 016-1984 Covered electrodes for manual are vvelding of ast iron Code and $ymbols for identification《铸铁手工电弧焊用涂料焊条 识别代码和符号》.pdf

JUS C H3 017-1982 Covered electrodes for manual are welding of stainless and other similar high alloy steels Code of symbols for Identification《不锈钢和其他类似高合金钢手工电弧焊用涂料焊条 识别代码和符号》.pdf

JUS C H3 018-1983 Welding Determinationof difusible hydrogen in weld metal of unalioyed and low alloyed covered ele-ctrodes《焊接 非合金和低合金涂料焊条焊缝中扩散氢的测定方法》.pdf

JUS C H3 019-1985 Filler meta s for vvelding Covered electrodes for manual are surfacing of steels Designation andIdentification《焊接用金属焊料 钢铁手工电弧焊用涂料焊条 命名和识别》.pdf

JUS C H3 020-1982 VVelding Covered electrodes Determination of the efficiency metal recovery and deposition coefficients《焊接 涂料焊条效率、金属回收率和熔敷系数的测定》.pdf

JUS C H3 022-1989 Weldiog Covered electrodes for manual metal are welding Deposition of a weld metal pad for chemical analjsis《焊接 手工金属弧焊用药皮电焊条 化学分析用焊接金属垫的配置》.pdf

JUS C H3 023-1990 VVelding Determination of ferite in austenitic weld metal deposited by covered Cr-Ni steel electrodes《焊接 由铬镍钢焊条覆盖的熔敷奥氏体焊接金属的铁氧体的测定》.pdf

JUS C H3 051-1981 Filler rods for gas welding of mild and low alloy steels《低碳和低合金钢用气焊用焊条》.pdf

JUS C H3 051-1991 Bare solid filler rods for oxy-acetylene and tungsten inert gas arc (TIG) welding depositing and unalloyed or low alloyed steel Codification《氧乙炔气和钨极隋性气体(TIG)焊接用裸固.pdf