JTG T 6303.1-2017 《收费公路移动支付技术规范 第一册 停车移动支付》.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

GA 425.1-2003 指纹自动识别系统基础技术规范 第1部分 指纹自动识别系统术语.pdf

猜你喜欢

NASA-TN-D-2770-1965 An investigation of the influence of aircraft tire-tread wear on wet-runway braking《飞机轮胎胎面磨损对湿跑道制动的影响研究》.pdf

NASA-TN-D-2824-1965 Large-scale wind-tunnel investigation of the low-speed aerodynamic characteristics of a supersonic transport model having variable-sweep wings《带有可变掠翼的超音速运输机模型低速.pdf

NASA-TN-D-2970-1965 A description of numerical methods and computer programs for two-dimensional and axisymmetric supersonic flow over blunt-nosed and flared bodies《在钝机头和向外展开机身上二维轴.pdf

NASA-TN-D-30-1960 Flight Investigation of the Lift and Drag Characteristics of a Swept-Wing Multijet Transport-Type Airplane《掠翼 多孔喷头运输类型的飞机升力和阻力特性飞行研究》.pdf

NASA-TN-D-3010-1965 On free vibrations of eccentrically stiffened cylindrical shells and flat plates《离心加强的圆柱形外壳和平板的自由振动》.pdf

NASA-TN-D-3021-1965 Flight-determined low-speed lift and drag characteristics of the lightweight m2-f1 lifting body《轻量级的m2-f1上升机身的飞行测定的低速升力和阻力特性》.pdf

NASA-TN-D-3075-1965 Fatigue of Rene 41 under constant-and random-amplitude loading at room and elevated temperatures《在室温和高温下及恒定和任意振幅荷载下的Rene 41的疲劳》.pdf

NASA-TN-D-3088-1965 Aerodynamic characteristics of spherically blunted cones at Mach numbers from 0 5 to 5 0《当马赫数为0 5至5 0时 球状钝锥的空气动力特性》.pdf

NASA-TN-D-3095-1966 Experimental heat-transfer results for cryogenic hydrogen flowing in tubes at subcritical and supercritical pressures to 800 pounds per square inch absolute《当次临.pdf