SJ 21373-2018 高可靠行波管衰减器制作工艺控制要求.pdf

相关资源

SJ 21377-2018 高可靠行波管排气工艺控制要求.pdf

SJ 21376-2018 高可靠行波管冷测工艺控制要求.pdf

SJ 21372-2018 高可靠行波管热测工艺控制要求.pdf

SJ 21375-2018 高可靠行波管电子枪装架工艺控制要求.pdf

SJ 21374-2018 高可靠行波管慢波组件夹持工艺控制要求.pdf

SJ 21378-2018 高可靠行波管螺旋线绕制工艺控制要求.pdf

猜你喜欢

FORD WSB-M4D844-A8-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚苯乙烯（PPE+PS）混合物成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD WSB-M4D845-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 5% MINERAL FILLED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用5%矿物填充的热塑性聚烯径弹性体(TEO)成型料 与标.pdf

FORD WSB-M4D853-A-2010 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) IMPACT MODIFIED 20% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%矿物填充的冲击改性热塑性聚氨酯弹性体(.pdf

FORD WSB-M4D854-A1-2010 POLYPROPYLENE (PP) 30% GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚丙烯（PP）废料再生成型料 与标准FORD WSS-M.pdf

FORD WSB-M4D854-A2-2010 POLYPROPYLENE (PP) 40% GLASS FIBER REINFORCED REMANUFACTURED COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的聚丙烯（PP）废料再生成型料 与标准FORD WSS-M99P1111-.pdf

FORD WSB-M4D857-A2-2006 STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED 16 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《16%玻璃纤维增强的苯乙烯马来.pdf

FORD WSB-M4D860-A-2011 ACETAL (POM) COPOLYMER 25% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《25%矿物填充模塑材料乙酸醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D861-A-2006 POLYPHTHALAMIDE (PPA) 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强、受热稳定的聚邻苯二甲酰胺(PPA)成型料 与标准.pdf

FORD WSB-M4D862-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 60 D HARDNESS 15 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的硬度为60.pdf