1、AMSC N/A FSC 7690 MIL-DTL-43719/4A 6 APRIL 2009 SUPERSEDING MIL-M-43719/4 31 March 1981 DETAIL SPECIFICATION SHEET MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; HAZARDOUS MATERIAL SYMBOLS This specification is approved for use by all Departments and Agencies of the Department of D
2、efense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-43719. REQUIREMENTS: Material. Material for the basic marker (figure 1) shall conform to type I, class 3, color white of ASTM D4956. Colors. Colors shall conform to the following
3、 (see table I of MIL-DTL-43719): Color name Red Light yellow Orange yellow Light blue Insignia blue Jet black Color number 11105 13655 13538 15102 15044 17038 Design. The design of the basic marker shall be as shown in figure 1. The size and dimensions of the basic marker shall be as shown in figure
4、 2. Specific hazard symbols and numerals. Specific hazard symbols and numerals shall be mounted on a translucent transfer sheet in accordance with 3.2.2 of MIL-DTL-43719. Specific hazard symbols. Specific hazard symbols are as follows: ACID, ALK, COR, OXY, W The heights of the letters shall be one-h
5、alf the height of the corresponding numerals for the specified size marker. The color of the letters shall be black. In all other respects, they shall conform to MIL-DTL-43719/3. Numerals. Numerals are as follows: 0, 1, 2, 3, and 4 Numerals shall conform to MIL-DTL-43719/1. The color of the numerals
6、 shall be black or white as specified. INCH-POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43719/4A 2Adhesion. Adhesion shall conform to type I, class 2 of MIL-DTL-43719. QUALITY ASSURANCE PROVISIONS: Reflectivity. Reflectivity shall be
7、 determined in accordance with ASTM D4956. PACKAGING Markers or marker sets shall be packaged as follows: Basic markers. Basic markers of one size only shall be furnished in unit packs of 100 each. Marker sets. Marker sets shall be furnished in unit packs containing 10 each of the appropriate size n
8、umerals, specific hazard symbols and basic markers. Intended use. Hazardous material symbol markers described herein are for use in connection with the National Fire Protection Association Standard (NFPA) 704M. Ordering data. Procurement documents should specify the following in addition to the orde
9、ring data listed in the general specification: (a) Size of basic marker, numerals and specific hazard symbols required. (b) If black or white numerals are required. (c) If basic markers only are required. (d) If marker sets are required. Changes from previous issue. Marginal notations are not used i
10、n this revision to identify changes with respect to the previous issue due to the extent of the changes.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43719/4A 3OXIDIZER ACID ALKALCORROSIVEOXYACIDALKCORUSE NOWATER W4 - DEADLY3 - EXTREME DANG
11、ER2 - HAZARDOUS1 - SLIGHTLYHAZARDOUS0 - NORMALMATERIALHEALTH HAZARDSPECIFICHAZARDFIRE HAZARDFLASH POINTS4 - BELOW 73F3 - BELOW 100F2 - 200F OR BELOW1 - ABOVE 200F0 - WILL NOT BURNREACTIVITY4 - MAY DETONATE3 - SHOCK AND HEATMAY DETONATE2 - VIOLENTCHEMICAL CHANGE1 - UNSTABLE IFHEATED0 - STABLE(RED)(BL
12、UE) (YELLOW)(WHITE)Figure 1. Basic marker. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43719/4A 4ABBFOR TYPESIZE OF TEXTSEE TABLEAACIDWCTETESIZE A B C E W T BORDER (WHERE REQD) TYPE SIZE POINTS MIN MAX 3 4 2.500 .750 .375 .625 .156 .016 7
13、 8 4 4 2.500 1.000 .500 .750 .156 .016 7 8 6 6 3.750 1.500 .750 1.000 .219 .016 10 12 8 8 5.000 2.000 1.000 1.500 .312 .031 14 1612 12 7.500 3.000 1.500 2.125 .469 .062 20 24 Figure 2. Dimensions.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DT
14、L-43719/4A 5Custodians: Preparing activity Army GL DLA IS Navy SA (Project 7690-2009-005) Air Force 99 Review activities: Army AT, AV, CR, MD Navy MC Air Force 84 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
