SJ 21377-2018 高可靠行波管排气工艺控制要求.pdf

相关资源

SJ 21376-2018 高可靠行波管冷测工艺控制要求.pdf

SJ 21372-2018 高可靠行波管热测工艺控制要求.pdf

SJ 21375-2018 高可靠行波管电子枪装架工艺控制要求.pdf

SJ 21374-2018 高可靠行波管慢波组件夹持工艺控制要求.pdf

SJ 21373-2018 高可靠行波管衰减器制作工艺控制要求.pdf

SJ 21378-2018 高可靠行波管螺旋线绕制工艺控制要求.pdf

猜你喜欢

ASTM F2326-2004 Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn《蜡烛燃烧时可视排放物的采集和分析的标准试验方法》.pdf

ASTM F2326-2004(2009) Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn《收集和分析燃烧时从蜡烛发出的可见光的标准试验方法》.pdf

ASTM F2326-2004(2015) Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn《收集和分析蜡烛燃烧时发出的可见排放的标准试验方法》.pdf

ASTM F2327-2003 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《水中油检测和监测用空中远程感应系统的选择用标准指南》.pdf

ASTM F2327-2008 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《水中油检测和监测用空中远程感应系统的选择用标准指南》.pdf

ASTM F2327-2015 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《用于监测和监视水上油的机载遥感系统选择的标准指南》.pdf

ASTM F2328-2005 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs《淬火和回火的螺纹钢螺栓、螺母和螺柱的脱碳和渗碳性测定的标准试.pdf

ASTM F2328-2005(2011) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs《测定硬化和回火螺纹钢螺栓 螺钉和螺柱螺栓的脱碳和.pdf

ASTM F2328-2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf