SJ 21327-2018 陶瓷外壳 贴装类装架工艺技术要求.pdf

相关资源

CB T 3668-1995 电刷镀镍、铜工艺技术要求.pdf

CB T 3711-1995 船用柴油机零件焊补修复工艺技术要求.pdf

CB T 3731-1995 船用柴油机零件镀铬修复工艺技术要求.pdf

CB T 3367-1992 成品油船货油舱涂装工艺技术要求.pdf

JB T 5750-1991 气象仪器防盐雾、防潮湿、防霉菌工艺技术要求.pdf

JB T 5750-2014 气象仪器防盐雾、防潮湿、防霉菌 工艺技术要求.pdf

QJ 3013-1998 红外光学产品粘接密封工艺技术要求.pdf

QJ 3014-1998 航天电子电气产品聚硫橡胶灌封工艺技术要求.pdf

QJ 3015-1998 印制电路板图形转移工艺技术要求.pdf

SY T 6464-2000 水平井完井工艺技术要求.pdf

猜你喜欢

ASTM D6066-1996(2004) Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential《液化潜能的评价用砂的常规耐穿透性测定的标准操作规程》.pdf

ASTM D6066-2011 8750 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential 《液化潜能的评价用砂的常规耐穿透性测定的标准操作规程》.pdf

ASTM D6067 D6067M-2017 red 0000 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conducti.pdf

ASTM D6067-1996(2003) Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization《环境定位特性用电子锥形透度计使用的标准指南》.pdf

ASTM D6067-2010 9375 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization《环境厂址表征用电子锥形透度计的标准使用指南》.pdf

ASTM D6068-1996(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials《测定塑料材料J-R曲线的标准试验方法》.pdf

ASTM D6068-2010 2500 Standard Test Method for Determining J-R Curves of Plastic Materials《塑料材料J-R曲线测定的标准试验方法》.pdf

ASTM D6070-2002 Standard Test Methods for Physical Properties of Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable《预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性.pdf

ASTM D6071-2006 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy《用石墨反应堆原子吸收光谱法测定高纯度水中低水平钠的标准试验方法》.pdf