FZ T 52055-2019 有色聚乙烯 聚丙烯(PE PP)复合短纤维.pdf

相关资源

FZ T 52024-2012 聚乙烯 聚丙烯（PE PP）复合短纤维.pdf

FZ T 52033-2014 聚乙烯 聚丙烯(PE PP)增白复合短纤维.pdf

GME TM 405400-1998 《自粘聚丙烯(PP) 聚乙烯(PE)薄膜 英语 德语》.pdf

GME QK 003800-2000 Polypropylene Material Types with Fillers (PP - PP PE - ) (English German)《含填料的聚丙烯材料(PP- PP PE- )英语 德语》.pdf

SH 2604.04-2003 水处理药剂.聚丙烯酸、聚丙烯酸钠.pdf

GME QK 003700-1995 《聚丙烯(PP) 聚乙烯(PE)英语 德语[代替 GME QK 000048 GME QK 009040 GME QK 009994]》.pdf

SH 2604.04-2003 水处理药剂 聚丙烯酸、聚丙烯酸钠.pdf

QB T 4634-2014 聚丙烯(PP)和双向拉伸聚丙烯(BOPP)面包袋.pdf

ANSI ASTM F2830-2011 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer《加工并连接聚乙烯(PE)气压力管和可剥聚丙烯.pdf

猜你喜欢

FORD WSS-M4D947-A1-2010 POLYAMIDE 66 (PA66) 30 % GLASS FIBER AND 15 % PTFE POWDER FILLED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维和15%聚四氟乙烯(PT.pdf

FORD WSS-M4D947-B1-2007 POLYAMIDE (PA) 66 25% GLASS FIBER REINFORCED IMPACT MODIFIED INTERNALLY LUBRICATED (PTFE) HEAT STABILIZED MOLDED IN COLOR MOLDING COMPOUND INTERIOR TO BE U.pdf

FORD WSS-M4D948-A1-2010 POLYCARBONATE + POLYETHYLENE TEREPHYTHALATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PET+PBT) MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D950-A1-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用热塑性聚氨.pdf

FORD WSS-M4D951-A1-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 19% GLASS MINERAL REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《19%玻璃 矿物增强的受热稳定的聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D951-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 19% GLASS MINERAL REINFORCED 25% MIN POST CONSUMER CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4D951-A1)《.pdf

FORD WSS-M4D952-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED REACTOR GRADE MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D952-A2 and WSS-M.pdf

FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED MOLDING COMPOUND UV STABILIZED MOLD-IN-COLOR PARTIALLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M4D952-A3-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED MOLDING COMPOUND FULLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用完全涂漆的不填充热塑性聚烯径(TEO)成型料.pdf