DB44 T 639-2009 贝类产地划型产品采样技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

猜你喜欢

ISA 75 08 06-2002 Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900 1500 and 2500)《凸缘球状控制阀体的面到面尺寸(等级900 1500和2500) 原标准号ISA 75 16 [代替 ISA 75 16]》.pdf

ISA 75 08 07-2001 Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150 300 and 600)《可分离式凸缘球状控制阀体的面到面尺寸(等级150 300和600)》.pdf

ISA 75 08 08-2015 Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150 300 and 600).pdf

ISA 75 08 09-2016 Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150 300 and 600).pdf

ISA 75 10 01-2013 General Requirements for Clamp or Pinch Valves.pdf

ISA 75 10 02-2014 Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150).pdf

ISA 75 10 03-2015 Installed Face-to-Face Dimensions for Shell and Tube Flanged Pinch Valves (Classes 125 and 150).pdf

ISA 75 11 01-2013 Inherent Flow Characteristic and Rangeability of Control Valves.pdf

ISA 75 13 01-2013 Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output.pdf