SN T 3306.5-2013 国境口岸环介导恒温扩增（LAMP）检测方法 第5部分：布鲁氏菌.pdf

相关资源

SN T 3306.8-2017 国境口岸环介导恒温扩增（LAMP）检测方法第8部分：基孔肯雅病毒.pdf

SN T 3306.8-2017 国境口岸环介导恒温扩增（LAMP）检测方法 第8部分：基孔肯雅病毒.pdf

SN T 3306.16-2021 国境口岸环介导恒温扩增（LAMP)检测方法 第16部分：寨卡病毒.pdf

SN T 3306.2-2012 国境口岸环介导恒温扩增（LAMP）检测方法 第2部分：产毒素霍乱弧菌.pdf

NY T 1467-2007 奶牛布鲁氏菌病PCR诊断技术.pdf

GB 16885-1997 布鲁氏菌病监测标准.pdf

WS 269-2007 布鲁氏菌病诊断标准.pdf

SN T 3306.5-2013 国境口岸环介导恒温扩增 检测方法 第5部分：布鲁氏菌.pdf

GB 15988-1995 布鲁氏菌病诊断标准及处理原则.pdf

猜你喜欢

ASTM D5570-1994(2005) Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure《用作外壳密封的胶带和胶粘剂耐水性标准试验方法》.pdf

ASTM D5571-1994(2005) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity《额定容量不超过60加仑(22.pdf

ASTM D5571-1994(2010) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity《额定容量不超过60加仑(22.pdf

ASTM D5571-2016 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity《额定容量不超过60加仑(227 L) 的.pdf

ASTM D5572-1995(2005) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products《非结构木材制品中指形接合用胶粘剂的标准规范》.pdf

ASTM D5572-1995(2012) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products《非结构木材制品中指形接合用胶粘剂的标准规格》.pdf

ASTM D5573-1999(2005) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints《纤维增强塑料(FRP)接合中失效方式分类的标准操作规程》.pdf

ASTM D5573-1999(2012) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints《纤维增强塑料(FRP)接合中失效方式分类的标准操作规程》.pdf

ASTM D5574-1994(2005) Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints《确定结构连接设计用木材胶粘剂允许机械性能的标准试验方法》.pdf