SY T 6492-2020 声速测井仪核实技术规范.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

猜你喜欢

FORD WSS-M4D556-B8-2017 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D578-A2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定冲击改良的35%玻璃加强聚酰胺(PA)6模塑材料 与.pdf

FORD WSS-M4D578-B1-2013 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D579-A2-2007 POLYVINYL CHLORIDE (PVC) OLEFIN MODIFIED - RIGID - HIGH HEAT - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《挤塑级耐高温刚性烯烃改性聚氯乙烯(PVC) 与标准FORD WSS-M99.pdf

FORD WSS-M4D582-A2-2011 POLYBUTYLENE TEREPHTHALATE (PBT) POLYETHYLENE TEREPHTHALATE HEAT STABILIZED 50% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《热稳定50%玻璃纤维增强聚丁.pdf

FORD WSS-M4D585-B-2011 ABS POLYCARBONATE BLEND (ABS + PC) IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的丙烯腈 聚碳酸酯混合物(ABS + PC) 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D585.pdf

FORD WSS-M4D585-C1-2013 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D585-C1-2017 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D595-A2-2015 POLYAMIDE 6 (PA 6) 40% GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf