DB15 T 3463-2024 双炉连续炼铜工艺技术规范.pdf

相关资源

CB T 3668-1995 电刷镀镍、铜工艺技术要求.pdf

CB T 3711-1995 船用柴油机零件焊补修复工艺技术要求.pdf

CB T 3731-1995 船用柴油机零件镀铬修复工艺技术要求.pdf

CB T 3367-1992 成品油船货油舱涂装工艺技术要求.pdf

JB T 5750-1991 气象仪器防盐雾、防潮湿、防霉菌工艺技术要求.pdf

JB T 5750-2014 气象仪器防盐雾、防潮湿、防霉菌 工艺技术要求.pdf

QJ 3013-1998 红外光学产品粘接密封工艺技术要求.pdf

QJ 3014-1998 航天电子电气产品聚硫橡胶灌封工艺技术要求.pdf

QJ 3015-1998 印制电路板图形转移工艺技术要求.pdf

SY T 6464-2000 水平井完井工艺技术要求.pdf

猜你喜欢

FORD WSD-M2D381-A3-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 83 DUROMETER A HARDNESS INTERIOR (Shown on WSD-M2D378-A2)《汽车内部用硬度为83 A.pdf

FORD WSD-M2D382-A1-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 89 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D382-A1-2017 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 89 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D384-A1-2004 THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE) 90 DUROMETER A HARDNESS GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A 《通用硬度为90 A的热塑性聚酯乙醚弹性体(TEEE) 与标.pdf

FORD WSD-M2D386-A2-2009 SILICONE RUBBER (MQ) SELF-LUBRICATED POLYCARBONATE (PC) COMPATIBLE TO BE USED WITH FORD WSS-M99P1111-A 《与聚碳酸酯（PC）相容的自动润滑型硅橡胶（MQ） 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSD-M2D393-A2-2009 SILICONE (VMQ) RUBBER HIGH TEMPERATURE RESISTANT HIGH ELONGATION 45 HARDNESS (IRHD) LONG-LIFE GASKET TO BE USED WITH FORD WSS-M99P1111-A 《长寿命垫片用IRHD硬度为45的.pdf

FORD WSD-M2D401-A-2004 FLUOROELASTOMER (FKM) OXYGENATED OXIDIZED FUEL RESISTANT COMPRESSION STRESS RELAXATION RESISTANT O-RING TO BE USED WITH FORD WSS-M99P1111-A 《耐充氧 氧化燃料的氟橡胶(F.pdf

FORD WSD-M2D401-A4-2004 O-RING EPICHLOROHYDRIN RUBBER (ECO) 65 IRHD COMPRESSIVE STRESS RELAXATION RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为65的耐压缩应力松弛的氯醇橡胶(ECO)O形环 与.pdf

FORD WSD-M2D404-A1-2009 POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM) GLASS ENCAPSULATION 80 IRHD TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为80的玻璃封闭的聚氨酯(PUR)弹性体反应.pdf