DB65 T 4759-2023 棉秸秆配合颗粒饲料生产技术规程.pdf

相关资源

JB T 6944-1993 颗粒饲料压制机 压模安装型式与尺寸.pdf

JB T 7141-1993 颗粒饲料分级筛 试验方法.pdf

JB T 51072-1999 颗粒饲料压制机 产品质量分等（内部使用）.pdf

SC T 6011-2001 平模颗粒饲料压制机 技术条件.pdf

SC T 6012-2002 平模颗粒饲料压制机试验方法.pdf

JB T 11254-2011 立式颗粒饲料稳定器.pdf

JB T 11925-2014 辊式颗粒饲料破碎机.pdf

JB T 5161-1991 颗粒饲料压制机 技术条件.pdf

JB T 5161-2013 颗粒饲料压制机.pdf

JB T 5169-1991 颗粒饲料压制机 试验方法.pdf

猜你喜欢

DIN 22270-2012 Continuous Surface Miner (CSM) - Safety《露天采矿机 (CSM) 安全性》.pdf

DIN 2231-2008 Geometrical product specifications (GPS) - Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size《产品几何量技术规范(GPS) 标称尺寸3～100mm的界限隙规和锻制量规体》.pdf

DIN 2232-2008 Geometrical product specifications (GPS) - Gap gauges GO with forged gauging member over 3 mm up to 100 mm nominal size《产品几何量技术规范(GPS) 锻造量规体标称直径3～100mm的过端隙规》.pdf

DIN 2233-2008 Geometrical product specifications (GPS) - Gap gauges NOT GO with forged gauging member over 3 mm up to 100 mm nominal size《产品几何量技术规范(GPS) 带锻制量规体标称尺寸3～100mm的不过端隙规》.pdf

DIN 2239-2006 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing《产品几何量技术规范(GPS) 尺寸计量量规 要求和检验》.pdf

DIN 2240-1-2001 Geometrical Product Specification (GPS) - Handles - Part 1 For gauging members with taper lock 1 50 up to 40 mm nominal diameter《几何产品规范(GPS) 手柄 第1部分 公称直径可达40mm的带1 5.pdf

DIN 2240-2-2001 Geometrical Product Specification (GPS) - Handles - Part 2 For gauging members over 40 mm nominal diameter Handles fixing screws and clamps《几何产品规范(GPS) 手柄 第2部分 公称直径.pdf

DIN 22400-1990 Control units of winding engines hoists and winches for mining《提升机的控制装置 采矿用起重机和绞车》.pdf

DIN 22405-1990 Friction pulley linings for winches and winders in mining《矿井提升机和卷扬机用摩擦轮衬层》.pdf