1、IEEE Application Guide for Surge Protection of Electric Generating Plants IEEE Std C62.23-2017 (Revision of IEEE Std C62.23-1995) IEEE Power and Energy Society Sponsored by the Surge Protective Devices Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C62.23-2017 (Revision of IEEE Std
2、 C62.23-1995) IEEE Application Guide for Surge Protection of Electric Generating Plants Sponsor Surge Protective Devices Committee of the IEEE Power and Energy Society Approved 6 December 2017 IEEE-SA Standards BoardAbstract: This guide consolidates most electric utility power industry practices, ac
3、cepted theories, existing standards/guides, definitions, and technical references as they specifically pertain to surge protection of electric power generating plants. Where technical information is not readily available, guidance is provided to aid toward proper surge protection and to reduce inter
4、ference to communication, control, and protection circuits due to surges and other overvoltages. It has to be recognized that this application guide approaches the subject of surge protection from a common or generalized application viewpoint. Complex applications of surge protection practices may r
5、equire specialized study by experienced engineers. Keywords: electric utilities, electric power, electric generating plants, generating plants, IEEE C62.23, power plants, surge protection The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyrigh
6、t 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 6 April 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, curr
7、ency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that
8、there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state
9、of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity
10、to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard
11、. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, W
12、HETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2018 IEEE. All righ
13、ts reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or
14、 oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, se
15、minars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents
16、 are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appro
17、priate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Commit
18、tees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome
19、to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance
20、 with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to ur
21、ge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both p
22、ublic and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE d
23、oes not waive any rights in copyright to the documents.5 Copyright 2018 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use
24、 or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can al
25、so be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, cor
26、rigenda, or errata. A current IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has n
27、ot undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given d
28、ocument is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development pr
29、ocess, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Pat
30、ents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a
31、patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or un
32、willing to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance
33、 has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submissio
34、n of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further in
35、formation may be obtained from the IEEE Standards Association.6 Copyright 2018 IEEE. All rights reserved. Participants At the time this IEEE guide was completed, the High-V oltage Surge Protection of Generating Plants Working Group had the following membership: Robert L. Allison, Chair Rusty Robbins
36、, Vice Chair Robert Allison Senthil Asok Kumar Thomas Barnes William Bloethe Kenneth Bow Demetrio Bucaneg Jose Cabrera Michael Champagne Arvind Chaudhary Danila Chernetsov Robert Christman Matthew Davis Patrick Di Lillo Gary Donner Jorge Fernandez Daher Thomas Field Dale Fredrickson Randall Groves S
37、teven Hensley Werner Hoelzl Ronald Hotchkiss Adria Jones Jim Kulchisky Christopher Kulig Benjamin Lanz Albert Livshitz Lawrenc Long Michael Maytum John McCclelland James Michalec Michael Newman Hans-Wo Oertel Lorraine Padden Mirko Palazzo Bansi Patel Shawn Patterson Branimir Petosic Christopher Petr
38、ola Jan Pirrong Michael Ramarge Russell Robbins Thomas Rozek Ryandi Ryandi Steven Sano Bartien Sayogo Carl Schuetz Hyeong Sim Jeremy Smith Gary Smullin Andrew Steffen K. Stump Trunh Thanh Tran Raul V elazquez John Wang Lanyi Wang Steven Whisenant James Wilson Chad Withers Jonathan Woodworth Ahmed Zo
39、baa The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Saleman Alibhay Thomas Barnes William Bloethe Kenneth Bow Derek Brown Gustavo Brunello William Bush William Byrd Paul Cardinal Mich
40、ael Champagne Suresh Channarasappa Arvind Chaudhary Robert Christman Stephen Conrad Matthew Davis Gary Donner Jorge Fernandez Daher Rostyslaw Fostiak Dale Fredrickson Jalal Gohari Randall Groves Ajit Gwal Steven Hensley Lee Herron Raymond Hill Werner Hoelzl Yuri Khersonsky Chad Kiger Jim Kulchisky C
41、hristopher Kulig Chung-Yiu Lam Albert Livshitz Lawrence Long Michael Maytum Omar Mazzoni John McClelland James Michalec Jerry Murphy R. Murphy Michael Newman Lorraine Padden Bansi Patel Shawn Patterson Branimir Petosic Christopher Petrola Jan Pirrong Alvaro Portillo Iulian Profir Charles Rogers Thomas Rozek Ryandi Ryandi Steven Sano Bartien Sayogo Carl Schuetz Jeremy Smith Gary Smullin Andrew Steffen K. Stump James Timperley John V ergis John Wang Daniel Ward Steven Whisenant Kenneth White James Wilson Jian Y u
