1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 603-11:1999 ICS 25
2、.100.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Bonded abrasive products Dimensions Part 11: Hand finishing sticksThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Com
3、mittee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35707 4 BS ISO 603-11:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 603-11:1999 and implements it as the UK national standard. The UK participatio
4、n in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powder, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or prop
5、osals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement inter
6、national publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the
7、necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title pag
8、e, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO60311:1999 (E) INTERNATIONAL STANDARD ISO 60311 Firstedition 19990715 Bondedabrasiveproducts D
9、imensions Part11: Handfinishingsticks ProduitsabrasifsagglomrsDimensions Partie11:PierresmainISO60311:1999(E) ii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedou
10、tthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectr
11、otechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandard
12、requiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO60311waspreparedbyTechnicalCommitteeISO/TC29, Smalltools,subcommittee SC5, Grindingwheelsandabrasives . Thisfirstedition,togetherwithISO6031:1999toISO60310:1999an dISO60312:1999toISO60316:1999, cancelsandreplacesISO/R
13、603:1967,ISO6032:1981,ISO 1117:1975,ISO2220:1972,ISO2933:1974,ISO 3290:1976andISO3921:1976asatechnicalrevisionofthesestandards. ISO603consistsofthefollowingparts,underthegeneraltitle BondedabrasiveproductsDimensions : Part1:Grindingwheelsforexternalcylindricalgrindingbetweencentres Part2:Grindingwhe
14、elsforcentrelessexternalcylindricalgrinding Part3:Grindingwheelsforinternalcylindricalgrinding Part4:Grindingwheelsforsurfacegrinding/peripheralgrinding Part5:Grindingwheelsforsurfacegrinding/facegrinding Part6:Grindingwheelsfortoolandtoolroomgrinding Part7:Grindingwheelsformanuallyguidedgrinding Pa
15、rt8:Grindingwheelsfordeburringandfettling/snagging Part9:Grindingwheelsforhighpressuregrinding Part10:Stonesforhoningandsuperfinishings Part11:Handfinishingsticks Part12:Grindingwheelsfordeburringandfettlingonastraightgrinder ISO60311:1999(E) iii Part13:Grindingwheelsfordeburringandfettlingonavertic
16、algrinder Part14:Grindingwheelsfordeburringandfettling/snaggingonananglegrinder Part15:Grindingwheelsforcuttingoffonstationaryormobilecuttingoffmachines Part16:GrindingwheelsforcuttingoffonhandheldpowertoolsINTERNATIONALSTANDARD ISO60311:1999(E) 1 BondedabrasiveproductsDimensions Part11: Handfinishi
17、ngsticks 1Scope ThispartofISO603specifiesthenominaldimensions,inmillimeters,of: Type90:Handfinishingsticks Thesebondedabrasiveproductsareintendedtobeusedforthegenerationandsharpeningofanytoolsurface.The workpieceisheldinthehandandthefinishingstickisguidedbyhand. 2Normativereference The following nor
18、mativedocumentcontainsprovisionswhich,throughreferenceinthistext,constituteprovisionsof this partofISO 603.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdo notapply.However,partiestoagreementsbasedonthispartofISO 603areencouragedtoinvestigatethe possibilityofapplyingt
19、hemostrecenteditionofthenormativedocumen tindicatedbelow.Forundatedreferences, thelateseditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintainregistersof currentlyvalidInternationalStandards. ISO525:1999, BondedabrasiveproductsGeneralrequirements .ISO60311:1999(E) 2 3Dimensions See
20、Table1. Table1DimensionsofType9010,Type9011,Type9020,Type9030andType9040 Type9010 Type9011 BCLB = CL 6 10 13 25 3 5 6 13 100 6 10 100 16 15 20 50 8 10 10 25 150 13 16 20 25 150 150 20 30 50 15 20 25 200 20 200 Type9020 Type9030 Type9040 BLBLB = 2CL 6 8 10 13 10 13 16 100 150 6 8 10 10 13 16 20 100 1
21、50 200 6 8 10 10 13 16 20 100 150 200 20 200 25 250 25 250 25 30 250 ISO60311:1999(E) 3 4Designation Acompletedesignationofabondedabrasiveproductinaccordancewit h this part of ISO 603 shall be consist of the followinginformation: a) b) designationofthebondedabrasives,e.g.Handfinishingstick; referenc
22、eofthispartofISO603; c) d) e) type(shape); dimensions; specificationsofaninternalnature; InaccordancewithISO525 andthispartofISO603 EXAMPLE Ahandfinishingstickforthegenerationofanytoolsurface,Typ e9020,B=13mm ,L=100mm ,natureof abrasiveC,grainsize150,bondVisdesignatedasfollows: HandfinishingstickISO
23、60311902013 3100C150V 5Specifications Thespecificationsarelefttothemanufacturesdiscretion,seeISO525. 5.1Marking MarkingofbondedabrasiveproductsisinaccordancewithISO525.ISO60311:1999(E) 4 Bibliography 1ISO84861, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart1:MacrogritsF4 toF22
24、0 . 2ISO84862, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart2:Microgrits F230toF1200 .BS ISO 603-11:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
25、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the in
26、ternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services
27、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individ
28、ual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response
29、to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its
30、 Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standa
31、rds developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of
32、the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior wri
33、tten permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
