1、BSI Standards Publication BS ISO/IEC 29142-2:2013 Information technology Print cartridge characterization Part 2: Cartridge characterization data reportingBS ISO/IEC 29142-2:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 29142-2:2013. The UK partici
2、pation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are resp
3、onsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 77893 3 ICS 37.100.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the S
4、tandards Policy and Strategy Committee on 31 July 2013. Amendments issued since publication Date Text affectedBS ISO/IEC 29142-2:2013 Information technology Print cartridge characterization Part 2: Cartridge characterization data reporting Technologies de linformation Caractrisation de cartouche dim
5、pression Partie 2: Rapport de donnes de caractrisation de cartouche ISO/IEC 2013 INTERNATIONAL STANDARD ISO/IEC 29142-2 First edition 2013-04-01 Reference number ISO/IEC 29142-2:2013(E)BS ISO/IEC 29142-2:2013ISO/IEC 29142-2:2013(E)ii ISO/IEC 2013 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/
6、IEC 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be
7、requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in SwitzerlandBS ISO/IEC 29142-2:2013ISO/IEC 29142
8、-2:2013(E) ISO/IEC 2013 All rights reserved iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erms and definitions . 1 4 Essential elements of cartridge characterization customer information .2 4.1 Cartridge information summary 2 5 Cartridge labels 3 5.1 Cartridge
9、 label application . 3 5.2 Cartridge label location . 3 5.3 Cartridge label information . 3 6 Cartridge notifications . 4 6.1 Cartridge notification application 4 6.2 Cartridge notification location 4 6.3 Cartridge notification information 5 7 Reporting structure . 6 8 Customer reports . 7 8.1 Custo
10、mer report application . 7 8.2 Customer report location . 8 8.3 Customer report information . 8 9 Cartridge attribute test reports .10 9.1 Cartridge attribute test report application 10 9.2 Cartridge attribute test report location 10 9.3 Cartridge attribute test report information 11 Annex A (normat
11、ive) Cartridge attribute checklist for ISO/IEC 29142 compliant cartridge characterization tests .13 Annex B (normative) Yield Standards Customer Reports and Cartridge Attribute Test Reports 14BS ISO/IEC 29142-2:2013ISO/IEC 29142-2:2013(E) Foreword ISO (the International Organization for Standardizat
12、ion) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to
13、deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and
14、 IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by t
15、he joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
16、rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 29142-2 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment.iv ISO/IEC 2013 All rights reservedBS ISO/IEC 29142-2:2013ISO/IEC 291
17、42-2:2013(E) Introduction The purpose of this part of ISO/IEC 29142 is to provide consistent documentation and reporting methods, for customer understanding, for the cartridge characterization test methods and provisions of ISO/IEC 29142. Specifications for notification and reporting applicable for
18、the ink and toner cartridge attribute characterization methods established in ISO/IEC 29142, and the environmental provisions established in ISO/IEC 29142-3, are given in this part of ISO/IEC 29142. Attributes characterized according to ISO/IEC 29142 standardized or specified test methods that compl
19、y with the test method requirements defined in ISO/IEC 29142-1, and environmental evaluations additionally in compliance with the provisions of ISO/IEC 29142-3, after inclusion in ISO/IEC 29142-2, Annex A, can be chosen for reporting, based on the manufacturer decision regarding the importance of th
20、e attributes and provisions to the intended customer. This part of ISO/IEC 29142 defines the documentation and reporting that are required to be used, if such an attribute is chosen to be characterized and reported. Such reported attributes and provisions do not provide for a complete cartridge attr
21、ibute characterization; however, the consistent information provided for each attribute, and the consistent testing underlying that information, enables comparison of provided provisions and attribute characterization results. ISO/IEC 2013 All rights reserved vBS ISO/IEC 29142-2:2013BS ISO/IEC 29142
22、-2:2013Information technology Print cartridge characterization Part 2: Cartridge characterization data reporting 1 Scope This part of ISO/IEC 29142 establishes the product and package labelling, and related reporting provisions for toner and ink cartridges used in printing devices that have a digita
23、l input printing path, including multi-function devices. This part of ISO/IEC 29142 is intended for equipment used in office environments. This part of ISO/IEC 29142 defines the information requirements for the cartridge characterization documentation on packaging and cartridges, and in reports. The
24、 labels, notifications, and reports established herein are specified in accordance with the terms, symbols, notations and framework of ISO/IEC 29142-1. The cartridge characterization tests that determine the test report information of the labels, notifications, and reports established herein are sta
25、ndardized or specified in parts of the ISO/IEC 29142 series. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l
26、atest edition of the referenced document (including any amendments) applies. ISO/IEC 19752, Information technology Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components ISO/IEC 19798, Method for
27、 the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components ISO/IEC 24711, Method for the determination of ink cartridge yield for colour inkjet printers and multi- function devices that contain printer components ISO/IEC 29142-1, Inform
28、ation technology Print cartridge characterization Part 1: General: terms, symbols, notations and cartridge characterization framework ISO/IEC 29142-3, Information technology Print cartridge characterization Part 3: Environment 3 T erms a nd definiti ons For the purposes of this document, the terms a
29、nd definitions given in ISO/IEC 29142-1 and the following apply. 3.1 cartridge attribute checklist list of available cartridge characterization tests, containing the defining standard or specification identifier, the attribute name, and the test result availability indicator, for each standardized o
30、r specified ISO/IEC 29142 cartridge characterization test to be provided in each customer report with a yes or no indication of whether cartridge characterization results are available for each of the listed tests INTERNATIONAL ST ANDARD ISO/IEC 29142-2:2013(E) ISO/IEC 2013 All rights reserved 1BS I
31、SO/IEC 29142-2:2013ISO/IEC 29142-2:2013(E) 3.2 cartridge attribute test report report including the information of a cartridge customer report and the detailed cartridge characterization results of an ISO/IEC 29142 cartridge characterization test reported for customer presentation according to a req
32、uired format Note 1 to entry: The format is prescribed according to each ISO/IEC 29142 standardized or specified cartridge characterization test and is in compliance with ISO/IEC 29142-2. 3.3 cartridge collector any party providing a cartridge take-back or collection program EXAMPLE A business entit
33、y designated to collect cartridges. 3.4 c a r t r id g e ident i f ie r formatted human readable arrangement of information uniquely specifying a distinct cartridge 3.5 cartridge label formatted human readable arrangement of information containing at least the cartridge identifier, displayed on the
34、cartridge and also on the cartridge package in the case of retail cartridge packaging 3.6 cartri d g e n o tifi ca ti o n human readable information to be included in accordance with ISO/IEC 29142 and, presented according to ISO/IEC 29142-2, containing at least the cartridge identifier, the cartridg
35、e supplier identification, and the cartridge colourant information, primarily located on cartridge packaging 3.7 cartridge packagingcontainment and customer information materials surrounding a cartridge placed for direct customer purchase 3.8 cartridge packagingcontainment materials surrounding a ca
36、rtridge for shipping, not intended for direct customer purchase 3.9 cartridge supplier cartridge marketer, manufacturer, remanufacturer, refiller, or distributor, being the party or parties responsible for marketing the cartridge and providing customer support for the cartridge 3.10 customer report
37、report, including a cartridge notification, and a cartridge attribute checklist, with summary results of selected ISO/IEC 29142 cartridge attribute characterization tests, presented according to a required format Note 1 to entry: The format is prescribed according to each ISO/IEC 29142 standardized
38、or specified cartridge characterization test and is in compliance with ISO/IEC 29142-2. 4 Essential elements of cartridge characterization customer information 4.1 Cartridge information summary Table 1 summarizes the information that is detailed below in the various label, notification, customer rep
39、orts, and cartridge attribute test report clauses. The table summarizes cartridge information for customers according to this International Standard.2 ISO/IEC 2013 All rights reservedBS ISO/IEC 29142-2:2013ISO/IEC 29142-2:2013(E) Table 1 Cartridge information Information Items Addressed in Cartridge
40、 Label A d d r e s s e d i n C a r t r i d g e N ot i f i c a t i o n Environmental Responsibility A locator for an operational Cartridge Take-back program should be provided on the cartridge itself. A cartridge supplier offering an operational cartridge take-back program should include “Cartridge T
41、ake-back Information” or equiva- lent wording, along with a link to program use information. A cartridge supplier not offering an operational cartridge take-back program shall not include such an indicator or link. Performance Attributes no A customer report can contain performance attribute test re
42、sults. Physical Attributes no A customer report can contain physical attribute test results. Supplier Type The distinction of original or non- original supplier is indicated by the requirement to identify the cartridge supplier. The distinction of original or non-original sup- plier is addressed thr
43、ough the requirement to include the cartridge supplier name, and by the requirement that only a single supplier identi- fier is discoverable or readable on the cartridge, accompanying packaging and in related ISO/ IEC 29142 reports. Cartridge Condi- tion The terms Remanufactured” or “Refilled” are n
44、either required nor dis- allowed in this part of ISO/IEC 29142 and such marking should follow appli- cable regulations. In compliance with ISO/IEC 29142, the environmental impact of a cartridge shall be assessed by means of stand- ards written in accordance with ISO/ IEC 29142-3. Cartridge environme
45、ntal impact assessment shall not be based on whether the cartridge is original, non-original, remanufactured, or refilled. These cartridge conditions do not indicate the environmental impact of the cartridge suppliers manufactur- ing and/or remanufacturing processes. The terms “Remanufactured” or “R
46、efilled” are neither required nor disallowed in this part of ISO/IEC 29142 and such marking should follow applicable regulations. In compliance with ISO/IEC 29142, the environ- mental impact of a cartridge shall be assessed by means of standards written in accordance with ISO/IEC 29142-3. Cartridge
47、suppliers and collec- tors should be aware that cartridge environmen- tal assessment is not based on whether the car- tridge is original, non-original, remanufactured, or refilled. These cartridge conditions do not indi- cate the environmental impact of the cartridge suppliers manufacturing and/or r
48、emanufacturing processes. 5 Cartridge labels 5.1 Cartridge label application This part of ISO/IEC 29142 imposes NO requirements dealing with cartridge label format. In the context of this International Standard, a cartridge label is defined only as a particular set of information. 5.2 Cartridge labe
49、l location The cartridge label shall be displayed on the cartridge. The cartridge label shall also be displayed on retail cartridge packaging. The cartridge label should be displayed on bulk cartridge packaging. 5.3 Cartridge label information 5.3.1 Cartridge identific ation The cartridge label shall contain a cartridge identifier. ISO/IEC 2013 All rights reserved 3BS ISO/IEC 29142-2:2013ISO/IEC 29142-2:2013(E) 5.3.2 Referencing ISO/IEC 29142 The cartridge label shall not include reference to “ISO/IEC 29142” in any context. 5
