1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 29143:2011 Information technology Automatic identification and data capture techniques Air interface specification for Mobile RFID interrogatorsBS ISO/IEC 29143:201
2、1 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 29143:2011. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee
3、can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 74881 3 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal obl
4、igations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2011. Amendments issued since publication Date Text affectedBS ISO/IEC 29143:2011Reference number ISO/IEC 29143:2011(E) ISO/IEC 2011INTERNATIONAL STANDARD ISO/IEC 29143 First
5、edition 2011-02-01 Information technology Automatic identification and data capture techniques Air interface specification for Mobile RFID interrogators Technologies de linformation Techniques didentification et de captage automatiques des donnes Spcification dinterface dair pour interrogateurs Mobi
6、le RFID BS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the compute
7、r performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create
8、this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Ce
9、ntral Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without perm
10、ission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2011 All rights
11、reservedBS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E) ISO/IEC 2011 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Conformance .2 3 Normative references2 4 Terms, definitions, symbols, abbreviated terms, and notation3 4.1 Terms and definitions .3 4.2 Symbols5 4.3 Abbreviated
12、 terms.5 4.4 Notation 5 5 Overview.6 6 Transmitter.6 6.1 Introduction6 6.2 Mobile UHF Transmitter6 7 Media Access Method.10 7.1 General Approach .10 7.2 Collision Detection10 7.3 Command Retransmission (Mandatory) .17 7.4 Random Wait Time (Mandatory) 19 7.5 Practical Implementation22 8 Tag Memory .2
13、2 8.1 General .22 8.2 Data Structures Dedicated to Mobile RFID .22 8.3 Data Exchange between Interrogator and Tag.24 9 Extended Command Set .25 9.1 Overview.25 9.2 Flex_Query(optional).25 Annex A (informative) Communication Collisions 28 Annex B (informative) Pseudo-Code Notation of the Collision Re
14、solution Algorithm30 Annex C (informative) Example: Random Wait Time Adaptation 32 Annex D (informative) Random Wait Time Application Examples.34 Annex E (informative) Mobile RFID Application Family Identifier36 Annex F (informative) Examples of Minimum and Maximum Wait Time Definition .40 Bibliogra
15、phy42 BS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E) iv ISO/IEC 2011 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members o
16、f ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organiza
17、tions, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Di
18、rectives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of
19、the national bodies casting a vote. ISO/IEC 29143 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. BS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E) ISO/IEC 2011 All rights reserved vIntroduction This
20、 International Standard provides an air interface specification for Mobile radio frequency identification (RFID) interrogators that are part of a passive backscatter system. This system comprises one or more mobile interrogators, also known as Mobile RFID interrogators, and an undefined number of ta
21、gs, also known as labels. Interrogators are not required to support channel sensing, i.e. do not need to implement Listen Before Talk (LBT), and transmit commands on the off chance under the risk of colliding with one or more peer- interrogators. Moreover, interrogators compliant to this Internation
22、al Standard are not obliged to synchronize by any means (wired or wireless), i.e. no control channel dedicated to coordinating Time Division Multiplexing (TDM) is provided. Tags are powered by the RF signal provided by the interrogator and respond to an interrogator by modulating the reflection coef
23、ficient of its antenna, thereby backscattering data to the interrogator. The working mode adopted by the tags is purely passive, i.e. tags do not actively initiate any kind of RF communication. In this International Standard, collision arbitration and collision avoidance for Mobile RFID applications
24、 are defined by specifying methods aimed at mitigating the impact of emerging collisions and mechanisms used to avoid follow-up collisions. The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that
25、compliance with this document may involve the use of patents concerning radio-frequency identification technology given in the clauses identified below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of these patent rights have assured IS
26、O and IEC that they are willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. BS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E)
27、vi ISO/IEC 2011 All rights reservedInformation on the declared patents may be obtained from: Contact details Patent Holder: Legal Name CISC Semiconductor Design+Consulting GmbH Contact for license application: Name & Department Markus Pistauer, CEO Address Lakeside B07 Address 9020 Klagenfurt, Austr
28、ia Tel. +43(463) 508 808 Fax +43(463) 508 808-18 E-mail m.pistauercisc.at URL (optional) www.cisc.at Patent holder: ETRI (Electronics and Telecommunications Research Institute) Contact for license application: Name & Department: Gilwon Kim, Intellectual Property Management Team Address: 138 Gajeongn
29、o, Yuseong-gu Address: Daejeon, 305-700, Korea Tel. +82-42-860-4908 Fax +82-42-860-3831 E-mail kwkimetri.re.kr URL (optional) www.etri.re.kr Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and
30、 IEC shall not be held responsible for identifying any or all such patent rights. The latest information on intellectual property that may be applicable to this International Standard can be found at www.iso.org/patents. BS ISO/IEC 29143:2011 INTERNATIONAL STANDARD ISO/IEC 29143:2011(E) ISO/IEC 2011
31、 All rights reserved 1Information technology Automatic identification and data capture techniques Air interface specification for Mobile RFID interrogators 1 Scope This International Standard applies to Mobile radio frequency identification (RFID) interrogator devices used to inventory passive or se
32、mi-passive backscatter tags at 860 MHz to 960 MHz in a mobile (non-fixed) application independent from specific communication details, i.e. modulation technique and command set. Furthermore, the scope of this International Standard is mobile consumer applications, whereas mobile enterprise applicati
33、ons are not covered as long as operating in a closed environment. An operating environment is considered to be closed if it belongs to a central administrative authority able to guarantee for sufficient isolation, i.e. preventing mobile enterprise interrogator devices from being used outside the ded
34、icated operating environment, and if sufficient spatial separation and/or electromagnetic shielding from adjacent operating environments is provided. An application is considered a consumer application if at least one of two interacting entities is a private individual (consumer) and the interaction
35、 is taking place in the public domain. Consequently, a Mobile RFID consumer application is defined as Mobile RFID equipment (e.g. mobile phones equipped with an RFID interrogator) being used in a consumer application. NOTE As there is currently no active contribution on Mobile HF interrogators, this
36、 International Standard covers only UHF. This International Standard specifies Mobile RFID interrogator media access control, interrogator to interrogator and multiple interrogator to tag collision arbitration scheme including interrogator requirements, interrogator to interrogator and multiple inte
37、rrogator to tag collision avoidance scheme, and tag memory use for Mobile RFID applications. This International Standard does not specify physical interactions (the signaling layer of the communication link) between interrogators and tags, interrogator and tag operating procedures and commands, and
38、the collision arbitration algorithm used to singulate (separate to the current response slot) a specific tag in a multiple-tag environment. NOTE These aspects are addressed by other International Standards. In particular, this International Standard does not replace any existing RFID air interface s
39、pecification issued by ISO/IEC but extends the existing methodologies for fixed RFID interrogators with mechanisms addressing BS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E) 2 ISO/IEC 2011 All rights reservedthe special challenges of Mobile RFID. The concepts and mechanisms described in this Internation
40、al Standard can be integrated in any existing RFID protocol approved by ISO/IEC for the given frequency range of 860 MHz to 960 MHz (unless explicitly prohibited by such protocol) regardless of the actual command set. The mechanisms defined by this International Standard can be used for Mobile RFID
41、interrogators used in consumer applications and compliant to ISO/IEC 18000-6. 2 Conformance To claim conformance with this International Standard, an interrogator shall comply with all relevant clauses, except those marked as “optional”. Moreover, the interrogator shall also operate within local rad
42、io regulations, which may further restrict operation. To claim conformance with this International Standard, an interrogator shall also fulfill all requirements to claim conformance with the basic air interface specification ISO/IEC 18000-6. NOTE The basic assumption is that this International Stand
43、ard cannot be used standalone. It is not intended to encourage usage of a proprietary air interface in combination with the extension defined in this International Standard and allow claiming conformance with this International Standard in that context. Mobility of the RFID interrogator device is no
44、t a requirement for claiming conformance with this International Standard. It is recommended that all RFID interrogators operating in public areas of service, where interrogator to interrogator and multiple interrogators to tag collisions cannot be ruled out by administrative measures such as Time D
45、ivision Multiplexing or Frequency Division Multiplexing, support the mechanisms specified in this International Standard regardless of the particular usage of the device (fixed, mobile, or both). Conformance may also require a license from the owner of any intellectual property utilized by this devi
46、ce. A mobile device shall only activate its RF for RFID capabilities if it is established that it operates according to the RF regulations of the country where it is turned on. For mobile phones this implies that the phone shall derive the country of operation from the network before activating the
47、RF capabilities for RFID. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
48、ISO/IEC 18000-6:2010, Information technology Radio frequency identification for item management Part 6: Parameters for air interface communications at 860 MHz to 960 MHz ISO/IEC 19762 (all parts), Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabular
49、y RFC 2141, URN Syntax, May 1997 RFC 3406, Uniform Resource Names (URN) Namespace Definition Mechanisms, October 2002 BS ISO/IEC 29143:2011 ISO/IEC 29143:2011(E) ISO/IEC 2011 All rights reserved 34 Terms, definitions, symbols, abbreviated terms, and notation 4.1 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19762 (all parts), ISO/IEC 18000-6 and the following apply. 4.1.1 basic air interface complementary air interface specification that can be used in
