1、Information technology UPnP Device Architecture Part 30-12: IoT management and control device control protocol IoT management and control transport generic service BS ISO/IEC 29341-30-12:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPn
2、P Device Architecture Part 30-12: IoT management and control device control protocol IoT management and control transport generic service Technologies de linformation Architecture de dispositif UPnP Partie 30-12: Protocole de contrle de dispositif de gestion et de contrle de lInternet des objets Ser
3、vice de transport gnrique de gestion et de contrle de lInternet des objets INTERNATIONAL STANDARD ISO/IEC 29341-30-12 Reference number ISO/IEC 29341-30-12:2017(E) First edition 2017-06 ISO/IEC 2017 National foreword This British Standard is the UK implementation of ISO/IEC 29341-30-12:2017. The UK p
4、articipation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract.
5、 Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 90905 4 ICS 35.200Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authorit
6、y of the Standards Policy and Strategy Committee on 31 July 2017. Amendments/corrigenda issued since publication Date Text affected BRITISH STANDARD BS ISO/IEC 29341-30-12:2017Information technology UPnP Device Architecture Part 30-12: IoT management and control device control protocol IoT managemen
7、t and control transport generic service Technologies de linformation Architecture de dispositif UPnP Partie 30-12: Protocole de contrle de dispositif de gestion et de contrle de lInternet des objets Service de transport gnrique de gestion et de contrle de lInternet des objets INTERNATIONAL STANDARD
8、ISO/IEC 29341-30-12 Reference number ISO/IEC 29341-30-12:2017(E) First edition 2017-06 ISO/IEC 2017 BS ISO/IEC 29341-30-12:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this pub
9、lication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the cou
10、ntry of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29341-30-12:2017(E) BS ISO/IEC 29341-30-12:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT
11、 ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written
12、 permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 2934
13、1-30-12:2017(E) ISO/IEC 29341-30-12:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS 1 Scope 1 2 Normative References . 1 3 Terms, Definitions and Abbreviations . 2 4 Notations and conventions . 2 4.1 Notation . 2 4.2 Data Types . 3 4.3 Vendor-defined Extensions . 3 5 Service Modelling Definiti
14、ons . 3 5.1 Service Type 3 5.2 SensorTransportGeneric Service Architecture . 3 5.3 Key Concepts . 3 5.3.1 Sensor Connectivity 3 5.3.2 Sensor HTTP/HTTPS Transport Protocol . 4 5.4 State Variables. 5 5.4.1 State Variable Overview 5 5.4.2 A_ARG_TYPE_SensorID . 5 5.4.3 A_ARG_TYPE_SensorURN . 5 5.4.4 A_A
15、RG_TYPE_SensorClientID 5 5.4.5 A_ARG_TYPE_DataRecords . 5 5.4.6 A_ARG_TYPE_DataRecordCount 7 5.4.7 A_ARG_TYPE_TransportURL 7 5.4.8 A_ARG_TYPE_SensorDataTypeEnable . 7 5.4.9 A_ARG_TYPE_SensorRecordInfo . 7 5.4.10 A_ARG_TYPE_TransportConnectionID 8 5.4.11 A_ARG_TYPE_TransportConnections . 8 5.5 Action
16、s . 9 5.5.1 ConnectSensor() . 9 5.5.2 DisconnectSensor() 12 5.5.3 ReadSensor() 13 5.5.4 WriteSensor() . 14 5.5.5 GetSensorTransportConnections() 15 5.5.6 Error Code Summary 16 6 XML Service Description . 17 Table 1 State Variables . 5 Table 2 Actions . 9 Table 3 Arguments for ConnectSensor() . 9 Tab
17、le 4 Error Codes for ConnectSensor() 11 Table 5 Arguments for DisconnectSensor() . 12 Table 6 Error Codes for DisconnectSensor() . 12 Table 7 Arguments for ReadSensor() 13 Table 8 Error Codes for ReadSensor() 14 Table 9 Arguments for WriteSensor() 14 BS ISO/IEC 29341-30-12:2017ISO/IEC 29341-30-12:20
18、17(E) iv ISO/IEC 2017 All rights reserved Table 10 Error Codes for WriteSensor() 15 Table 11 Arguments for GetSensorTransportConnections() . 16 Table 12 Error Codes for GetSensorTransportConnections() . 16 Table 13 Error Code Summary 16 BS ISO/IEC 29341-30-12:2017ISO/IEC 29341-30-12:2017(E) iv ISO/I
19、EC 2017 All rights reserved Table 10 Error Codes for WriteSensor() 15 Table 11 Arguments for GetSensorTransportConnections() . 16 Table 12 Error Codes for GetSensorTransportConnections() . 16 Table 13 Error Code Summary 16 ISO/IEC 29341-30-12:2017(E) ISO/IEC 2017 All rights reserved v Foreword ISO (
20、the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees
21、 established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
22、In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria
23、needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of pa
24、tent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade
25、 name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standards, the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adh
26、erence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341-30-12 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1, Information technology, in parallel with it
27、s approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. BS ISO/IEC 29341-30-12:2017ISO/IEC 29341-30-12:2017(E) vi ISO/IEC 2017 All right
28、s reserved Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights
29、 have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has inform
30、ed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or gr
31、anted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it h
32、as patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US BS ISO/IEC 29341-30-12:2017ISO/IEC 29341-30-12:2017(E) vi ISO/IEC 2017 All rights reserved Introdu
33、ction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of -these patent rights have assured ISO
34、and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO tha
35、t it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as l
36、isted below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applicat
37、ions or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US ISO/IEC 29341-30-12:2017(E) ISO/IEC 2017 All rights reserved vii Information may be obtained from: Hewlett Packard C
38、ompany 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 H
39、uawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it ha
40、s patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via
41、 Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA 95134 Attention is drawn to the possibility that some of the elements of this doc
42、ument may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341-30-12:2017ISO/IEC 29341-30-12:2017(E) viii ISO/IEC 2017 All rights reserved Original UPnP Document Reference may be m
43、ade in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UPnP Forum. The following table indicates the original UPnP document titles and the cor
44、responding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/IEC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device
45、ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 293
46、41-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-
47、11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2008 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2011 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP ScheduledRecording:2 I
48、SO/IEC 29341-4-14:2011 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2008 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2011 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityC
49、ameraMotionImage:1 Service ISO/IEC 29341-5-10 UPnP DigitalSecurityCameraSettings:1 Service ISO/IEC 29341-5-11 UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12 UPnP HVAC_System:1 Device ISO/IEC 29341-6-1 UPnP ControlValve:1 Service ISO/IEC 29341-6-10 UPnP HVAC_FanOperatingMode:1 Service ISO/IEC 29341-6-11 UPnP FanSpeed:1 Service ISO/IEC 29341-6-12 UPnP HouseStatus:1 Service ISO/IEC 29341-6-13 UPnP HVAC_SetpointS
