1、BSI Standards Publication Communication networks and systems for power utility automation Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model PD IEC/TS 61850-80-4:2016National foreword This Published Document is the UK implementation of IEC/TS 61850-80-4:2016.
2、The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the n
3、ecessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 88992 9 ICS 33.200 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Doc
4、ument was published under the authority of the Standards Policy and Strategy Committee on 31 March 2016. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD IEC/TS 61850-80-4:2016 IEC TS 61850-80-4 Edition 1.0 2016-03 TECHNICAL SPECIFICATION Communication networks
5、 and systems for power utility automation Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.200 ISBN 978-2-8322-3222-4 Registered trademark of the International Electrotechnical Commission Warning! Make sure th
6、at you obtained this publication from an authorized distributor. colour inside PD IEC/TS 61850-80-4:2016 2 IEC TS 61850-80-4:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms and definitions 6 4 Data modelling hierarchy . 8 4.1 General . 8 4.2 IEC 62056
7、 principles . 9 4.3 The data models and the application layer of IEC 62056 10 4.4 The IEC 61850 principles 11 5 Translation of IEC 62056 COSEM objects into IEC 61850-Logical Nodes 11 5.1 General translation principles 11 5.1.1 General . 11 5.1.2 IEC 61850 DataTypeTemplates to IEC 62056 Common Data T
8、ypes 12 5.2 Translation tables 13 5.2.1 General . 13 5.2.2 Metering and measurement 14 Figure 1 Overview of relationship between data models 9 Figure 2 The IEC 62056 framework 9 Table 1 IEC 62056 terminology 7 Table 2 IEC 61850 terminology 8 Table 3 IEC 62056 Register Class 11 Table 4 Conventions 12
9、 Table 5 Data Type mapping . 12 Table 6 Column heading descriptions . 13 Table 7 Metering and measurement logical node classes 14 Table 8 MMTR . 14 Table 9 MMTN . 15 Table 10 MMXU . 16 Table 11 MMXN . 18 PD IEC/TS 61850-80-4:2016IEC TS 61850-80-4:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMIS
10、SION _ COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national el
11、ectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Speci
12、fications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internat
13、ional, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The forma
14、l decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for
15、 international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4)
16、 In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall
17、 be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certifi
18、cation bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injur
19、y, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references ci
20、ted in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identify
21、ing any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an Inte
22、rnational Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of public
23、ation to decide whether they can be transformed into International Standards. IEC TS 61850-80-4, which is a technical specification, has been prepared by IEC technical committee 57: Power systems management and associated information exchange. PD IEC/TS 61850-80-4:2016 4 IEC TS 61850-80-4:2016 IEC 2
24、016 The text of this technical specification is based on the following documents: Enquiry draft Report on voting 57/1602/DTS 57/1659/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table. This publication
25、 has been drafted in accordance with the ISO/IEC Directives, Part 2. The content of this part of IEC 61850 is based on existing or emerging standards and applications. A list of all parts of the IEC 61850 series, published under the general title Communication networks and systems for power utility
26、automation, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will b
27、e transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are
28、considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. PD IEC/TS 61850-80-4:2016IEC TS 61850-80-4:2016 IEC 2016 5 INTRODUCTION IEC 61850 defines communication networks and systems for power utility automation, and mor
29、e specifically the communication architecture for subsystems such as substation automation systems, feeder automation systems and SCADA for distributed energy resources. In essence, IEC 61850 is a description of the communication architecture for the overall power system management when the combined
30、 total of the above mentioned subsystems are considered. The devices in the electricity grid are becoming more intelligent with an increasing number of elements and increasing complexity of data to be processed in a distributed environment. Introduction of comprehensive data models simplifies the ha
31、ndling and management of the data drastically since the models can be re-used once standardized. By defining a number of standardized hierarchical names, it can drastically reduce errors in the field. The names in the standard can be directly used for the configuration of devices and the communicati
32、on between devices. This part of IEC 61850, which is a technical specification, defines the one-to-one relationship of IEC 62056 OBIS codes to IEC 61850 Logical Nodes. The purpose is to increase the availability of revenue meter information to other applications defined within the IEC 61850 framewor
33、k. This increased visibility will contribute to information available for smart grid applications. The other benefit of defining these relationships is in regards to the design of protocol converters. With a clear specification, test cases can be developed as well as end user understanding of the qu
34、antities is unambiguous. Finally, end user configuration is simplified by limiting the options for translation. PD IEC/TS 61850-80-4:2016 6 IEC TS 61850-80-4:2016 IEC 2016 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 80-4: Translation from the COSEM object model (IEC 62056) t
35、o the IEC 61850 data model 1 Scope Included within the IEC 61850 power utility automation architecture are its concepts, data models, communication protocols and the mapping data exchanges on the substation network. This extends beyond just IEDs to other IEC 61850 enabled devices like meters, system
36、 applications and remote access gateways. This part of IEC 61850, which is a technical specification, considers the requirements of power utility automation applications; i.e. the scope is limited by the use cases relevant for meter data exchange in HV/MV substations and MV/LV substations. Only use
37、cases that require the data exchange involving a revenue meter are considered. Applications not covered by the existing standards listed in Clause 2 are out of scope. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensabl
38、e for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC TS 61850-2, Communication networks and systems in substations Part 2: Glossary IEC 61850-7-2, Communication netwo
39、rks and systems for power utility automation Part 7-2: Basic information and communication structure Abstract communication service interface (ACSI) IEC 61850-7-3:2010, Communication networks and systems for power utility automation Part 7-3: Basic communication structure Common data classes IEC 618
40、50-7-4:2010, Communication networks and systems for power utility automation Part 7-4: Basic communication structure Compatible logical node classes and data object classes IEC 62056-6-1:2015, Electricity metering data exchange The DLMS/COSEM suite Part 6-1: Object Identification System (OBIS) IEC 6
41、2056-6-2:2016, Electricity metering data exchange The DLMS/COSEM suite Part 6-2: COSEM interface classes 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC TS 61850-2 and IEC 61850-7-2 apply. In addition, the terms and definitions given in IEC 62056-6-1
42、 and IEC 62056-6-2 apply. PD IEC/TS 61850-80-4:2016IEC TS 61850-80-4:2016 IEC 2016 7 Due to the fact that the same or similar terminology exist from the two standards areas and may have different meanings, the terminology to be used in this document is explicitly defined in Table 1 and Table 2. In a
43、ddition, in some cases, the terms are elaborated to provide more insight on the application for users who are not experts in the standards area. Table 1 IEC 62056 terminology Term Description COSEM Companion Specification for Energy Metering according to IEC 62056-6-2. OBIS Code Object Identificatio
44、n System according to IEC 62056-6-1, uniquely identifying data objects within COSEM compliant metering equipment. COSEM Interface Class (IC) The Interface Class (IC) defines the common characteristics (by means of attributes and methods) of a set data objects. The interface class specifies the chara
45、cteristics of the objects encountered at the interface through which a system interacts with the objects. Implementation issues are not considered. An IC consists of several attributes and methods. The first attribute is always the “logical name”. The set of standardised Interface Classes are define
46、d in IEC 62056-6-2. COSEM object An Interface class is instantiated by assigning a specific OBIS code to the logical name of the IC. The result of the instantiation of an IC is a specific data object. The instantiation of an Interface Class may be part of the meter configuration or part of the produ
47、ction process. A meter operating in the field contains a set of objects. Data is exchanged by accessing these objects. Example: the IC “Register” defines the generic data structure for any metering register containing 3 attributes (logical name, measured value and the unit). By assigning the logical
48、 name “total electrical energy A +” to the IC “Register” we have formed a specific data object providing information on the totally energy consumption. The set of standardised OBIS codes are defined in IEC 62056-6-1. Class ID(CID) The Class ID identifies a specific class of the set of standardised I
49、nterface Classes. For example, Class_ID of 3 identifies the class type “Register”. Physical Device A physical device is a subsystem which has a physical connection to a communication medium and which can be addressed by a physical address. The behaviour of the physical device is modelled with a set of logical devices. A physical device must contain a “management logical device”. Logical Device A logical device is an abstract entity within a physical device. A log