STAS SR ISO 2419-1996 Leather - Conditioning of test pieces for physical tests《皮革．物理测试的测试部件条件作用 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ T 10506-1994 电子元器件详细规范 CB11型金属箔式聚苯乙烯膜介质直流固定电容器 评定水平E.pdf

SJ T 10512-1994 CCW5型管形瓷介预调可变电容器详细规范.pdf

SJ T 10515.1-1994 塑封模具结构 典型结构.pdf

SJ T 10515.2-1994 塑封模具结构 型腔结构.pdf

SJ T 10515.5-1994 塑封模具结构 注塑结构.pdf

SJ T 10519.1-1994 塑料注射模零件 模板.pdf

SJ T 10519.2-1994 塑料注射模零件 垫块.pdf

SJ T 10519.3-1994 塑料注射模零件 顶杆固定板 垫板.pdf

SJ T 10519.4-1994 塑料注射模零件 带头导柱.pdf