STAS 12743 3-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Current-carrying capacity tests《电气设备的机电元件 基本测试成语和测量方法 载流能力测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 714-1979 4号内挂拉杆.pdf

HB 715-1979 5号外挂拉杆.pdf

HB 716-1979 6号外挂拉杆.pdf

HB 717-1979 带滚轮的锥柄靠模立铣刀 d＝25-50mm.pdf

HB 718-1979 无端齿的锥柄靠模立铣刀D=12~50mm.pdf

HB 720-1979 下料铣刀D=8mm.pdf

HB 721-1979 镶齿套式面铣刀用高速钢楔形齿纹刀齿.pdf

HB 722-1979 加工轻合金镶齿套式面铣刀用高速钢楔形齿纹刀齿.pdf

HB 723-1979 加工轻合金用镶硬质合金刀齿套式面铣刀用楔形齿纹刀齿.pdf