STAS SR EN 24-1996 Doors - Measurement of general flatness of door leaves《门 门叶的一般平面测量 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 1776-1995 Glass — Resistance to attack by hydrochloric acid at 100°C Flame emission or flame atomic absorption spectrometric method《玻璃．在100°C抗攻击盐酸．火焰发射或火焰原子吸收光谱法． 》.pdf

STAS SR ISO 1784-1995 Aluminium alloys Determination of zinc EDTA titrimetric method《铝合金．锌的测定．乙二胺四乙酸滴定法》.pdf

STAS SR ISO 1795-1995 Rubber raw natural and synthetic material - Sampling and further preparative procedures《橡胶，原材料，自然和合成材料．取样和进一步制备程序 》.pdf

STAS SR ISO 1797-1-1992 Dental rotary instrumente - Shahks Part 1 Shanks made of metals《牙科旋转仪．柄第1部分：金属制把柄》.pdf

STAS SR ISO 1797-2-1992 Dental rotary instruments - Shanks Part 2 Shanks made of plastics《牙科旋转器械．把柄第二部：塑料制把柄》.pdf

STAS SR ISO 1798-1983 Polymeric materials cellular flexible Determination of tensiie strength and elongation at break.《高聚物多孔材料．张力强度和断裂延伸率的测定》.pdf

STAS SR ISO 1807-1995 Continuous mechanica! handling equipment for loose bulk materials - Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal.pdf

STAS SR ISO 1815-1995 Continuous mechanical handling equipment for Ioose bulk materials -Vibrating feeders and conveyors《大量松散材料的连续机械装卸设备．振动供料机和传送带 》.pdf

STAS SR ISO 1816-1995 Continuous mechanical handling equipment for loose bulk materials and unit loads - Belt conveyors - Basic characteristics of motorized driving pulleys《大型松散材料和.pdf